Skip to content
Omnikalc

Static stability factor and rollover calculator

Enter the track width, the center of gravity height, the vehicle weight and a roof load to get the static stability factor, the rollover threshold in g, an approximate rating and the speed on a curve.

Updated on
Your inputs
in

Value out of range

in

Value out of range

lb

Value out of range

lb

Value out of range

in

Value out of range

ft

Value out of range

Results

Static stability factor (SSF)

1.271

Lateral acceleration at which it tips

1.27 g

SSF with the roof load

1.165

Approximate star rating (1 to 5, from SSF)
4
Speed at which it would tip on the curve
75.5 mph
Tips before sliding on dry road (1 if SSF is under 0.8)
0
Center of gravity height with the roof load
26.2 in
Tipping speed on the curve with the roof load
72.3 mph

The static stability factor and rollover calculator gives the SSF of a vehicle from its track width and center of gravity height, the lateral g at which it tips, an approximate star rating, the speed on a curve at which it would tip, and the effect of a roof load on all of these.

How the calculation works

  • Enter the track width and the center of gravity height of the vehicle.
  • Enter the vehicle weight, the roof load and its height, and the radius of a curve.
  • Read the SSF, the tipping limit, the rating and the effect of the load.

Example

A vehicle with a track of 61 in and a center of gravity at 24 in has a static stability factor of 1.271, so it tips at 1.27 g, with an approximate rating of 4 stars. On a curve of 300 ft, that is a speed of 75.5 mph. With a roof load of 200 lb at 75 in, the center of gravity rises to 26.2 in, the SSF falls to 1.165 and the tipping speed to 72.3 mph.

Why it matters

The calculator helps owners of SUVs, vans, trucks and trailers, fleet managers, engineers and students who want to understand how stable a vehicle is, and what a roof box, a lifted suspension or a heavy load does to its resistance to rollover.

Good to know

Take the track width from the specifications, and the center of gravity height from a measurement, a manufacturer figure or an estimate. The SSF is a static indicator and ignores the suspension roll, the tire flex and the dynamic maneuvers, which reduce the real margin. The calculated tipping speed is an upper limit for an ideal flat curve: real tires slide at a lower acceleration on most roads, and a trip on a curb or soft soil can tip a vehicle at a much lower speed. Drive more slowly with a high load.

The banked curve calculator gives the speed of a banked turn, the lateral load transfer calculator shows the tire loads, the center of gravity height calculator measures the height and the tongue weight calculator sets the load on a hitch.

Frequently asked questions

What is the static stability factor?

The SSF is the track width divided by twice the height of the center of gravity: SSF = T / (2h). It is the lateral acceleration, in g, at which a rigid vehicle on a flat road would begin to tip over if the tires did not slide first. A low sports car has an SSF above 1.4, a typical sedan about 1.3 to 1.5, and a tall SUV or van about 1.0 to 1.2.

How does it relate to the star rating?

In the United States, the rollover resistance rating of NHTSA starts from the SSF and adds a test of the dynamic behavior. The star rating relates to the risk of rollover in a single-vehicle crash, from five stars for a risk under 10 percent to one star above 40 percent. The thresholds used here are an approximation, not the official rating of a model.

Why does a roof load matter?

Weight placed on the roof raises the center of gravity of the whole vehicle, and so lowers the SSF. A load of 200 pounds on the roof of a 4,500-pound SUV raises the center of gravity by about 2 inches. The effect is larger for a light vehicle, and tall cargo, such as a rooftop box or a stack of luggage, has a more marked effect.

Do vehicles really tip at that value?

On pavement, tires usually slide before a vehicle tips, because the grip is below the SSF of most vehicles. Rollovers happen mostly when the vehicle is tripped, for instance by a curb, soft soil or a ditch, which creates a sideways force at the wheels. The SSF indicates the margin of a vehicle in such cases.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.