Skip to content
Omnikalc

Strehl ratio calculator

Enter three independent wavefront error terms and the wavelength to get the total error, the Strehl ratio and the Maréchal limit for a diffraction-limited system.

Updated on
Your inputs
nm

Value out of range

nm

Value out of range

nm

Value out of range

nm

Value out of range

nm

Value out of range

Results

Strehl ratio (Maréchal approximation)

0.849

Total RMS wavefront error
35.4 nm
Error in waves at the wavelength
0.0643 λ
Peak intensity lost
15.1 %
Maximum RMS error for a Strehl of 0.8 (about λ/14)
41.3 nm
Strehl ratio at the second wavelength
0.990

The Strehl ratio calculator adds three independent error terms to give the total RMS wavefront error, the error in waves, the Strehl ratio, the intensity lost, the maximum error for a Strehl of 0.8 and the Strehl ratio at a second wavelength.

How the calculation works

  • Enter the RMS wavefront error of each of the three sources, in nanometres.
  • Enter the wavelength of use and a second wavelength to compare.
  • Read the Strehl ratio and check it against the 0.8 limit.

Example

Errors of 20 nm, 25 nm and 15 nm nm add in quadrature to 35.4 nm, or 0.0643 λ at 550 nm nm. The Strehl ratio is 0.849, so 15.1 % of the peak intensity is lost. The limit for 0.8 is 41.3 nm, and at 2200 nm nm the Strehl ratio is 0.990.

Why it matters

The calculator helps optical designers, telescope makers and students who must set an error budget for lenses, mirrors and mounts and want to know if the image will be sharp enough for the wavelength they use.

Good to know

The Maréchal approximation is accurate for a Strehl ratio above about 0.5 and gets poor for a large error, where the formula gives too low a value. The errors must be independent and random to add in quadrature, and the RMS value is taken over the pupil, with the tilt and the focus usually removed. A Strehl ratio gives the peak and not the shape of the image, so a system can have the same value with different blur patterns. For astronomy, the seeing of the atmosphere adds to the optical error, and adaptive optics reduces it.

The diffraction grating calculator treats the dispersion of light, the Rayleigh scattering calculator gives the scattering by small particles, the optical link budget calculator tracks the power in a fiber link and the polarizer extinction ratio calculator evaluates a polarizer.

Frequently asked questions

What is the Strehl ratio?

The Strehl ratio is the peak intensity of the image of a point source made by a real optical system divided by the peak intensity of the ideal image that the same system would give without aberrations. A value of 1 is perfect, and an optical system is called diffraction-limited when the Strehl ratio is at least 0.8.

How is it estimated from the wavefront error?

For small errors, the Maréchal approximation gives S ≈ exp(−(2πσ/λ)²), where σ is the RMS wavefront error and λ the wavelength. Independent error terms add in quadrature, the square root of the sum of their squares, so the largest term dominates the total.

What is the Maréchal criterion?

It states that a system is diffraction-limited when its RMS wavefront error is below about λ/14, which gives a Strehl ratio of 0.8. This corresponds to a peak-to-valley error of about a quarter wave for common aberrations, the older Rayleigh criterion.

Why is the Strehl ratio better in the infrared?

The same error in nanometres is a smaller fraction of a longer wavelength. A system with a poor Strehl ratio in the visible can be nearly diffraction-limited in the near infrared, which is why adaptive optics works best at longer wavelengths in astronomy.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.