Skip to content
Omnikalc

Soil loss calculator (USLE): how much soil does your field lose each year?

Enter the rainfall erosivity, the soil erodibility, the slope factor, the cover factor and the practice factor to get the average soil loss, the total loss and the depth lost.

Updated on
Your inputs

Value out of range

Value out of range

Value out of range

Value out of range

Value out of range

acres

Value out of range

tons/acre/yr

Value out of range

Results

Soil loss rate

6.48 tons/acre/yr

Total soil loss
97.2 tons/yr
Depth of soil lost per year
0.044 in/yr
Soil loss compared with the tolerable level
1.30 ×
Above tolerable: add cover or conservation practices

Water erosion removes the best part of a field. The soil loss calculator (USLE) multiplies the five factors of the Universal Soil Loss Equation: rainfall erosivity, soil erodibility, slope length and steepness, cover management and support practice. It gives the average soil loss per acre per year, the total loss for the field, the depth of soil lost and a comparison with the tolerable loss.

How the calculation works

  • Universal Soil Loss Equation: A = R × K × LS × C × P, where A is the average soil loss per acre per year.
  • R is the erosive power of the rain, K the erodibility of the soil, LS the effect of the length and steepness of the slope, C the effect of the crop and the cover, and P the effect of conservation practices.
  • Total soil loss = A × the area of the field.
  • Depth lost = tons per acre ÷ the weight of soil per acre-inch. At a dry bulk density of 1.3 g/cm³ one ton per acre is about 0.0068 inch.
  • Compared with tolerable = A ÷ T. A value above 1 means the field loses soil faster than the soil forms.

Example

A field of 15 acres has R = 150, K = 0.30, LS = 1.2, C = 0.12 and P = 1. The soil loss is 150 × 0.30 × 1.2 × 0.12 × 1 = 6.48 tons/acre/yr, so the field loses 97.2 tons a year, about 0.044 inch of soil. The tolerable level is 5 tons/acre/yr, so the field is at 1.30 times the limit.

Why it matters

Farmers, land managers and planners use the equation to see which fields lose the most soil, to compare cropping systems before choosing one, and to show whether a conservation plan brings the loss under the tolerable level. A change in cover or practice shows up at once.

Good to know

The equation predicts a long-term average for sheet and rill erosion only. It does not cover gullies, stream banks, wind erosion, or a single big storm, and the factors are estimates drawn from tables. Treat the result as a relative guide and use local factor values from the soil conservation service before you rely on it.

The gabion calculator sizes the wire baskets used to hold a slope and the dry well calculator sizes a pit that takes runoff from a roof.

Frequently asked questions

What is the Universal Soil Loss Equation?

It is an empirical equation, developed in the United States from thousands of plot-years of data, that predicts the long-term average soil loss from sheet and rill erosion on a slope. It multiplies five factors: rain, soil, slope, cover and practices. A revised version is called RUSLE.

Where do I find the factors?

R comes from isoerodent maps for your region, K from the soil survey of your county, and LS from tables or a formula with the length and the percent slope. C and P come from tables of crops and practices. Extension offices and soil conservation services publish all of them.

What is a tolerable soil loss?

It is the highest rate of erosion at which the soil can keep its productivity for a long time. In the United States it is 1 to 5 tons per acre per year, depending on the depth and the nature of the soil, because new soil forms slowly. A deep soil tolerates more loss than a shallow one.

How do I reduce the soil loss?

Lower C with cover crops, residue and no-till farming, lower P with contour farming, strip cropping and terraces, and lower LS by shortening the slope with diversions. Since the factors multiply, each reduction in one cuts the loss by the same percentage.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.