Skip to content
Omnikalc

How big should a dry well be?

Size a dry well or soakaway from the roof or paved area that drains into it, the design storm and the fill, with the pit dimensions and the gravel to order.

Updated on
Your inputs
sq ft

Value out of range

in

Value out of range

%

Value out of range

ft

Value out of range

Results

Pit volume

198 cu ft

Side of a square pit

7.0 ft

Runoff to store
592 gal
Gravel to order (if gravel fill)
10.3 tons
Do a percolation test first, and keep the dry well at least 10 ft from foundations

A dry well is an underground pit that collects runoff from a roof or paved area and lets it soak slowly into the soil. It keeps water away from foundations and reduces puddles and erosion. This calculator sizes the pit for a design storm and estimates the gravel to fill it.

How much water to store

The runoff from a storm is the area draining to the dry well times the rainfall depth times a runoff coefficient. Roofs shed about 95% of the rain that falls on them; driveways about 85 to 90%; lawns much less. One inch of rain on 1,000 sq ft of roof gives 1,000 × 1/12 × 0.95 = 79 cu ft of water, about 592 gallons.

Which storm to design for depends on your climate and local rules. Many homeowner guides use 1 to 2 in, the rainfall of a heavy storm. Some municipalities set a specific design storm for stormwater permits.

Pit volume and fill

Water fills only the spaces between the fill material. Washed gravel has about 40% voids, so the pit must be 79 ÷ 0.4 = 198 cu ft. Prefabricated plastic dry well chambers or stormwater crates are mostly void, around 95%, which makes the pit far smaller.

At 4 ft deep, 198 cu ft needs about 49.5 sq ft of area, a pit roughly 7 ft square. Gravel weighs about 1.4 tons per cubic yard, so filling it takes about 10 tons.

Soil matters most

A dry well only works if the soil can absorb the water within a day or two. Before digging, do a percolation test: dig a hole about 1 ft wide and as deep as the planned pit, fill it with water to saturate the soil, refill it and measure how fast the level drops. Sandy and gravelly soils drain well; clay may drain only an inch or less per hour, which calls for a larger pit, several dry wells or another solution such as a rain garden.

Placement and building tips

  • Keep the dry well at least 10 ft from foundations and away from septic fields and wells.
  • Run a solid pipe from the downspout, sloped at least 1/8 in per foot.
  • Line the pit with geotextile fabric to keep soil out of the gravel.
  • Add an overflow route for storms larger than the design storm.
  • Call 811 before digging, and check local rules: some areas regulate or require permits for infiltration systems.

Frequently asked questions

How big should a dry well be?

About 198 cu ft of gravel-filled pit for 1,000 sq ft of roof in a 1 in storm.

How much runoff does a roof produce?

About 0.6 gallon per square foot per inch of rain: 592 gallons for 1,000 sq ft.

How far should a dry well be from a house?

At least 10 ft from foundations.

Does a dry well work in clay soil?

Poorly; test percolation first and enlarge the pit or use several.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.