Skip to content
Omnikalc

Rifle twist rate calculator: what barrel twist stabilizes your bullet?

Enter the bullet diameter, length and muzzle velocity to get the barrel twist from the Greenhill formula and the spin rate of the bullet.

Updated on
Your inputs
in

Value out of range

in

Value out of range

ft/s

Value out of range

Results

Recommended twist rate (inches per turn)

11.71 in

Twist rate as 1 turn in N calibers
38.0
Bullet length in calibers
3.94 cal
Spin rate at the muzzle
2,715 rev/s
Spin rate at the muzzle (rpm)
162,915
Constant used in the Greenhill formula
150

A bullet needs the right spin to fly straight. The rifle twist rate calculator takes the bullet diameter, the bullet length and the muzzle velocity, and gives the twist from the Greenhill formula, the twist in calibers, the bullet length in calibers, the spin rate in revolutions per second and per minute, and the constant used.

How the calculation works

  • Enter the bullet diameter (the caliber, such as 0.308 inch), the bullet length and the muzzle velocity.
  • The Greenhill formula gives the twist, in inches per turn, as T = C × D² ÷ L, where D is the diameter, L the length and C a constant: 150 for velocities up to 2,800 ft/s and 180 above.
  • The result is the barrel twist that stabilizes the bullet, such as 1:11.7. A shorter twist (a smaller number) spins the bullet faster, which is needed for longer, heavier bullets.
  • The calculator also gives the bullet length in calibers and the spin rate at the muzzle, velocity ÷ twist.

Example

A 0.308 in bullet that is 1.215 in long leaves the barrel at 2,650 ft/s. The constant is 150, so the twist is 150 × 0.308² ÷ 1.215 = 11.71 inches per turn, which is about 1:11.7 or one turn in 38.0 calibers. The bullet is 3.94 calibers long and spins at 2,650 × 12 ÷ 11.71 = 2,715 revolutions per second, or about 162,900 rpm.

Why it matters

Handloaders and shooters use the twist to choose bullets that suit a barrel, or a barrel for the bullets they want to shoot. A bullet that is too long for the twist tumbles or groups badly.

Good to know

Greenhill is a simplified rule and ignores bullet weight distribution, air density and temperature. Check bullets with the manufacturer’s twist advice or a stability calculator. This tool is for information, and any shooting must follow local laws and safety rules.

The bullet energy calculator gives the kinetic energy of the bullet, and the MOA calculator converts angular size to distance.

Frequently asked questions

What is the twist rate of a rifle barrel?

It is the distance in which the rifling makes one full turn, for example 1:10 inches. A faster twist, such as 1:7, spins the bullet more quickly, and a slower twist, such as 1:14, spins it less. The right twist keeps the bullet stable in flight so it flies nose first and accurately.

What is the Greenhill formula?

It is an old rule of thumb for the twist needed to stabilize a bullet, T = C × D² ÷ L, with C of 150 at velocities up to 2,800 ft/s and 180 above. It works well for conventional lead-core bullets of moderate length, but not for very long, heavy or high-density bullets.

Can a twist be too fast?

A twist that is much faster than needed overspins the bullet, which can increase wear, raise pressure slightly and, for thin-jacketed bullets, risk disintegration. A modest amount of extra stability is usually harmless, but accuracy can suffer if the bullet is badly overstabilized.

Are there better methods than Greenhill?

Yes. The Miller stability formula includes the bullet weight, the air temperature, pressure and velocity, and gives a stability factor. Modern long-range bullets are usually checked with it or with a ballistic program. Use this result as a first estimate.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.