The air grille size calculator gives the airflow of each grille, the free area and the gross face area needed, the side of a square grille and the velocity over the face, from the total airflow, the number of grilles, the design velocity and the free area.
How the calculation works
- Enter the total airflow and the number of grilles that share it.
- Enter the design velocity through the free area and the free area of the grille, as a percentage of its face.
- The calculator finds the airflow of each grille, the free area and the face area needed, the side of a square grille and the velocity over the gross face.
Example
A room that receives 600 cfm through 3 grilles has 200 cfm per grille. At 500 fpm through the free area, each grille needs 200 / 500 × 144 = 57.6 in² of free area. If the free area is 70 percent of the face, the face area is 57.6 / 0.70 = 82.3 in², a square grille of 9.07 in per side, and the velocity over the gross face is 350 fpm.
Why it matters
The calculator helps HVAC installers, designers, estimators, builders and homeowners to size the registers and the return grilles of a system, to compare the sizes of grilles for a quiet system, and to check that a grille in a catalog has enough free area for the airflow.
Good to know
Select the grille from the catalog with its free area and its noise rating at your airflow, since the dimensions alone do not tell you the performance. Use a larger grille for a return, put the returns far from the supplies, and size the grille on the free area and not on the nominal size. Check that a furniture or a rug does not cover the grille, and keep the dampers open.
Related tools
The duct size calculator gives the diameter of a duct for an airflow, the air changes calculator gives the airflow of a room, the ceiling fan calculator gives the size of a fan and the duct leakage allowable calculator gives the leakage that a duct system may have.