Skip to content
Omnikalc

Composite metal deck concrete volume and ponding calculator

Enter the deck area, the concrete above the deck, the rib depth and fill, the deck deflection, the ponding factor, the waste and the truck size to get the concrete volume and the trucks.

Updated on
Your inputs
ft²

Value out of range

in

Value out of range

in

Value out of range

Value out of range

in

Value out of range

Value out of range

%

Value out of range

yd³

Value out of range

Results

Concrete with waste

204.2 yd³

Average thickness of the slab
5.25 in
Concrete volume
194.4 yd³
Truckloads
21

The composite metal deck concrete volume and ponding calculator gives the average thickness of the slab, the volume of concrete, the volume with waste and the number of truckloads for a slab on a composite metal deck, with the fill of the ribs and the ponding by the deflection of the deck.

How the calculation works

  • Enter the area of the deck, the concrete above the deck and the depth of the ribs.
  • Enter the part of the ribs filled, the deflection of the deck, the ponding factor, the waste and the truck volume.
  • The calculator finds the average thickness, the volume of concrete, the volume with waste and the truckloads.

Example

A deck of 12,000 ft² has 3.25 in of concrete above a 3 in rib, filled at 0.55, so the ribs add 3 × 0.55 = 1.65 in. The deck deflects 0.5 in under the wet concrete, and with a ponding factor of 0.70 this adds 0.35 in. The average thickness is 5.25 in, and the volume is 12,000 × 5.25 / 12 / 27 = 194.4 yd³. With 5 % of waste, the order is 204.2 yd³, that is 21 trucks of 10 yd³.

Why it matters

The calculator helps concrete contractors, estimators, steel erectors and students to estimate the concrete of a composite floor, to include the ponding that is often forgotten, and to plan the number of trucks of a pour.

Good to know

Measure the real deflection of the deck and of the beams before the pour and adjust the quantity. Consider shoring or a stronger deck if the ponding is large. Order the concrete with a margin for the first pour, and plan the pour sequence so that the deck is not overloaded by the piles of the concrete.

The concrete volume calculator gives the volume of a pour, the slab joint spacing calculator gives the joints of a slab, the one-way slab minimum thickness calculator gives the thickness of a slab and the concrete formwork calculator estimates the forms.

Frequently asked questions

What is a composite metal deck?

A composite metal deck is a corrugated steel sheet that serves as the formwork of a concrete slab during the pour and as the tension reinforcement of the slab after the concrete has hardened. The embossments of the deck bond the steel to the concrete. The deck is supported by the steel beams, often with shear studs welded through it.

How is the volume of concrete found?

The volume is the area of the slab times the average thickness. The average thickness is the concrete above the deck plus the concrete in the ribs, which is the depth of the ribs times the part of the ribs filled. The part filled is about 0.5 to 0.6 for the usual trapezoidal deck. The manufacturer of the deck gives the volume per unit of area for each profile.

What is the ponding of the concrete?

The deck deflects under the weight of the wet concrete, and the concrete fills the dip, so the slab is thicker at the middle of the span than the nominal thickness. The extra concrete is an average of about 0.6 to 0.7 of the deflection of the deck. A deck with a long unshored span can add a large quantity, and the extra weight must be included in the design of the deck and of the beams.

What are the limits of the calculator?

The calculator uses an average value of the rib fill and of the ponding. It does not take into account the deflection of the beams, which also adds concrete, the camber of the beams, the edge forms, the slab openings, the thickened parts or the real profile of the deck. The quantity must be checked with the data of the manufacturer, and with the profile of the real deck.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.