Skip to content
Omnikalc

How many lattice panels for deck skirting?

Enter the length to skirt, the height and the panel size: get the panels to buy, the rails for the top and bottom, the vertical nailers and the cost.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

ft

Value out of range

ft

Value out of range

ft

Value out of range

$

Value out of range

Results

Panels to buy

3

Leave gaps or vents for airflow under the deck, and plan a removable access panel

Cost of the panels

$90

Strips cut from each panel
2
Top and bottom rails
80 ft
Vertical nailers
21

Deck skirting closes the gap between the deck and the ground, hiding storage and keeping animals out. This calculator works out how many lattice or slatted panels you need, how many strips to cut from each panel, the rails and vertical nailers for the framing, and the cost.

How the calculation works

  • Lengths of panel = length to skirt ÷ panel length, rounded up
  • Strips per panel = panel height ÷ skirting height, rounded down
  • Panels = lengths ÷ strips per panel, rounded up
  • Rails = 2 × length to skirt, top and bottom
  • Nailers = length ÷ spacing, rounded up, + 1

For 40 ft of skirting 2 ft high with lattice panels 4 × 8 ft, you need five 8 ft lengths. Each panel can be ripped into two 2 ft strips, so 3 panels are enough. Plan 80 ft of rails and 21 nailers every 2 ft. At $30 a panel, the panels cost $90.

Skirting options

Material Look Notes
Vinyl lattice Classic, low upkeep Easy to cut, does not rot
Wood lattice Classic, paintable Needs stain or paint
Horizontal or vertical boards Modern Leave gaps for air
Composite boards Matches composite decking Higher cost
Faux stone panels Masonry look Highest cost

Ventilation matters

A closed deck traps moisture, which rots joists and invites mold. Lattice breathes on its own; solid boards need gaps of at least 1/4 in or vents every few feet. Leave a small gap at the bottom so the skirting does not wick up water from the soil.

Building tips

  • Hang the skirting on a frame of pressure-treated rails and nailers, not directly on the deck posts.
  • Keep the bottom rail off the ground or set it on gravel.
  • Add a hinged or removable access panel to reach plumbing, wiring and storage.
  • Bury hardware cloth a few inches into the ground behind the skirting to stop animals from digging under.
  • Paint or stain wood before installing so the back is protected too.

Measuring

Measure the height at several points: on sloping ground, the skirting is taller at one end. Use the tallest height for the panel count, and trim each panel to the slope.

Frequently asked questions

How many lattice panels for 40 ft of deck skirting?

3 panels of 4 × 8 ft for a 2 ft height, each cut into two strips.

How much framing for deck skirting?

About 80 ft of rails for 40 ft and 21 nailers every 2 ft.

Does deck skirting need ventilation?

Yes; lattice breathes, but solid boards need gaps or vents.

How do I keep animals out from under a deck?

Bury hardware cloth a few inches into the ground behind the skirting.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.