Skip to content
Omnikalc

How much does deck railing cost?

Enter the length of railing on the deck and stairs, the material, gates and post spacing: get the railing to buy, the total cost, the average price per foot, the posts and the balusters.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

Value out of range

ft

Value out of range

Results

Estimated total cost

$4,000

Most building codes require a guard at least 36 inches high on decks more than 30 inches above the ground, with openings that block a 4-inch sphere and a top rail that resists a 200-pound push

Posts needed

10

Railing to buy (stairs count 25% longer)
55 ft
Average cost per foot
$73
Balusters for spindle styles (about)
96

A deck railing is both a safety feature and a design element, and its price is set mostly by the material. Wood is the cheapest and glass the most expensive, with composite, vinyl, aluminum and cable in between. This calculator multiplies your railing length by the installed price per foot of your chosen material, adds the longer run of a stair railing and any gates, and estimates the number of posts and, for spindle styles, balusters.

How the calculation works

  • Railing to buy = deck railing length + stair railing length × 1.25 (stairs run on a slope)
  • Total = railing to buy × installed price per foot + gates × $150
  • Posts = deck length ÷ post spacing, rounded up, plus one, plus two for a stair railing
  • Balusters = deck length × 2.4 (1.5-inch spindles with gaps under 4 inches, which gives about 2.4 per foot)

Example

A deck has 40 ft of railing and a stair railing of 12 ft. Counting the stair run, you need 55 ft of railing. With composite railing at $70 per foot and 1 gate at $150, the total is $4,000, or about $73 a foot. Posts every 6 ft call for about 10 posts, and a spindle style needs about 96 balusters. In wood, the same job costs about $2,350, and in glass about $12,250.

Material comparison

  • Pressure-treated wood is the cheapest but needs staining or sealing every year or two and can warp or crack.
  • Vinyl is low-maintenance and holds its color, though it can look plain and can crack in extreme cold.
  • Composite combines a wood look with low maintenance and sits in the middle on price.
  • Aluminum is strong, thin, light and does not rust, with powder-coated finishes that last for years.
  • Cable keeps views open but requires tensioning and strict spacing; check that your local code accepts it.
  • Glass gives an unobstructed view and is the most expensive. It needs regular cleaning.

Building code basics

In most places, a guard is required when the deck surface is more than 30 inches above the ground. The usual minimum height is 36 inches, and openings must not let a 4-inch sphere pass. The top rail should resist a 200-pound load applied in any direction, and stairs need a graspable handrail between 34 and 38 inches high. Local codes vary, and an inspector must approve the work, so check with your building department before you buy.

Frequently asked questions

How much does deck railing cost?

Typically $40 to $220 per linear foot installed, so $1,600 to $9,000 for 40 feet.

How high must a deck railing be?

36 inches in most US codes for decks over 30 inches above the ground, and 42 inches for commercial.

What is the 4-inch rule?

No opening in a railing may let a 4-inch sphere pass through.

Which railing material lasts longest?

Aluminum and glass; wood needs staining every year or two.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.