Skip to content
Omnikalc

Concrete mix embodied carbon calculator

Enter the weights of cement, fly ash, slag cement and aggregates, the strength and the volume to get the embodied carbon of a concrete mix per cubic yard and for the whole pour.

Updated on
Your inputs
lb/yd³

Value out of range

lb/yd³

Value out of range

lb/yd³

Value out of range

lb/yd³

Value out of range

lb/yd³

Value out of range

psi

Value out of range

yd³

Value out of range

lb CO₂e/lb

Value out of range

lb CO₂e/lb

Value out of range

lb CO₂e/lb

Value out of range

lb CO₂e/lb

Value out of range

Results

Embodied carbon of the mix

485.5 lb CO₂e/yd³

Share from the cement
96.4 %
Replacement of cement by fly ash and slag
16.1 %
Embodied carbon per 1,000 psi of strength
121.4 lb CO₂e/yd³ per ksi
Saving against an all-cement mix
88 lb CO₂e/yd³
Embodied carbon of the pour
24.3 short tons CO₂e

The concrete embodied carbon calculator adds the emissions of the cement, the supplementary cementitious materials and the aggregates of a mix to give the embodied carbon per cubic yard, the intensity per unit of strength and the total of a pour.

How the calculation works

  • Enter the weights of cement, fly ash, slag cement and aggregates in one cubic yard, the strength and the volume of the pour.
  • Check the emission factors of each material, in pounds of CO₂e per pound, and replace them with the values of your supplier or your environmental product declaration.
  • The calculator adds the products to get the embodied carbon per cubic yard, the share of the cement, the intensity per unit of strength and the total of the pour.

Example

A mix has 520 lb of cement, 100 lb of fly ash, 1,800 lb of coarse and 1,300 lb of fine aggregate. The cement gives 520 × 0.90 = 468.0 lb, the fly ash 100 × 0.02 = 2 lb and the aggregates 3,100 × 0.005 = 15.5 lb, so the mix has 485.5 lb CO₂e/yd³. The cement is 96.4 % of it. At 4,000 psi the intensity is 121.4 lb per ksi, and a pour of 100 yd³ gives 24.3 short tons of CO₂e. Using fly ash for 16.1 % of the cementitious material saves 88 lb per yd³.

Why it matters

The calculator helps engineers, contractors, sustainability consultants and students to compare mix designs, to see how much a replacement of cement saves and to estimate the carbon of a pour for a green building rating or a carbon budget.

Good to know

Enter the weights of the mix design as they come out of the batch ticket, in saturated surface dry condition. Use the factors of your supplier when you have them, because a cement from a modern kiln can be far below the default and one from an old kiln above it. Compare mixes at the same strength and at the same age, as the intensity per ksi does, and not only the weight per cubic yard. The result is the product stage only, so add the transport, the placing and the reinforcing steel for a whole life or a whole building value.

The fly ash and slag replacement calculator designs the mix with supplementary materials, the concrete yield calculator checks the volume of the batch, the concrete volume calculator gives the quantity of a pour and the admixture calculator gives the dosage per batch.

Frequently asked questions

What is embodied carbon?

Embodied carbon is the greenhouse gas emitted to make a material, counted in CO₂ equivalent (CO₂e), from the extraction of the raw materials to the gate of the plant. For concrete it is mostly the cement, because the kiln that makes clinker burns fuel and releases the CO₂ of the limestone. The aggregates, the water and the admixtures add little.

What factors should I use?

The factors in the calculator are typical orders of magnitude, about 0.9 lb of CO₂e per lb for portland cement, a few hundredths for fly ash and 0.07 for slag cement. They differ by plant and by country. For a project, take the values of the environmental product declaration (EPD) of the producer, and enter them in the factor fields.

How can I lower the carbon of a mix?

The strongest levers are to replace a part of the cement by fly ash, slag cement or calcined clay, to use portland-limestone cement, to avoid more cement than the strength needs by using a lower design margin or a longer age for strength, and to cut the volume of concrete. Check that the mix still meets the strength, the setting time and the durability.

What does the calculator leave out?

The calculator leaves out the transport of the materials and of the concrete, the energy of the batching plant, the admixtures, the reinforcing steel and the formwork, and the carbon taken up by the concrete during its life. It covers the product stage of the mix only.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.