Skip to content
Omnikalc

Cracking moment calculator: when does a concrete beam first crack?

Enter the section size, the concrete strength and the span to get the modulus of rupture, the cracking moment and the uniform load that cracks the beam.

Updated on
Your inputs
in

Value out of range

in

Value out of range

psi

Value out of range

ft

Value out of range

Results

Cracking moment Mcr

5.06 kip-ft

Modulus of rupture fr
474.3 psi
Uniform load that cracks the beam
281 lb/ft
Self-weight of the beam
100 lb/ft
Extra load before cracking
181 lb/ft

A concrete beam is stiff and uncracked until the tension on its lower face reaches the tensile strength of the concrete, and then it cracks. The cracking moment calculator takes the section width and depth, the concrete strength, the concrete type and the span, and gives the modulus of rupture, the cracking moment, the uniform load that cracks a simply supported beam, its self-weight and the extra load before cracking.

How the calculation works

  • Enter the width and the overall depth of the rectangular section, the concrete strength and the concrete type.
  • Enter the span of a simply supported beam to turn the moment into a load.
  • The ACI 318 modulus of rupture is fr = 7.5 × λ × √f’c (psi). The cracking moment is Mcr = fr × Ig / yt, which for a rectangle is fr × b × h² / 6.
  • On a simple span, a uniform load w causes a moment w L² / 8, so the cracking load is 8 Mcr / L². Subtract the self-weight (150 pcf) to get the extra load the beam carries before it cracks.

Example

A section 12 in wide and 8 in deep, in 4,000 psi normal-weight concrete, has a modulus of rupture of 7.5 × √4,000 = 474 psi. The cracking moment is 474.3 × 12 × 8² / 6 = 60,700 lb-in, or 5.06 kip-ft. On a 12 ft simple span, the uniform load that cracks the beam is 8 × 5.06 / 12² = 281 lb/ft. The self-weight is 100 lb/ft, so it cracks under an extra 181 lb/ft.

Why it matters

The cracking moment separates the uncracked and cracked behaviour of a beam or slab, which sets deflections, crack widths and the minimum steel. A quick calculation shows how much load a section carries before it cracks, and how a deeper section, which has a cracking moment growing with h², delays cracking.

Good to know

The calculator uses the gross rectangular section and ignores the reinforcement, which adds a little stiffness, along with shrinkage, creep, temperature and restraint effects that lower the cracking load in real structures. It assumes a simple span with a uniform load and a unit weight of 150 pcf. Treat the figures as design guidance, not as a prediction of the first crack.

The section modulus calculator gives the bending capacity of a section, the moment of inertia calculator gives its stiffness, the beam deflection calculator finds the sag under load, and the rebar calculator counts reinforcing steel.

Frequently asked questions

What is the cracking moment?

It is the bending moment at which the tension face of an uncracked concrete section reaches the tensile strength of the concrete, called the modulus of rupture. Below it, the section behaves like an elastic beam of the full cross-section. Above it, cracks open and the reinforcement carries the tension, so the stiffness drops.

What is the modulus of rupture?

It is the tensile stress at the extreme fibre when a plain concrete beam breaks in a bending test. ACI 318 gives it as 7.5 λ √f'c in psi, or 0.62 λ √f'c in MPa. It is higher than the direct tensile strength, which is about 4 to 5 times √f'c in psi, and test values scatter by 15 % or more.

Why do I need the cracking moment?

Deflection calculations switch from the gross to the cracked section stiffness once the moment exceeds Mcr, and minimum reinforcement rules aim to make the flexural strength larger than the cracking moment so the beam does not fail suddenly at first crack. It also matters for crack control and for prestressed members.

Does the beam fail when it cracks?

No. A properly reinforced beam keeps carrying load after it cracks because the steel takes over the tension, and it fails at a much higher moment. The cracking moment marks the end of the uncracked stage and the start of the visible cracks, with an increase in deflection.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.