Skip to content
Omnikalc

Moving load absolute maximum moment calculator

Enter the two axle loads, their spacing, the span and a lane load to get the absolute maximum moment of a truck on a simple span, its position, the maximum shear and the total moment.

Updated on
Your inputs
kips

Value out of range

kips

Value out of range

ft

Value out of range

ft

Value out of range

kip/ft

Value out of range

Results

Total moment (truck plus lane load)

474.0 kip-ft

Distance from the heavier axle to the resultant
2.80 ft
Absolute maximum moment from the truck
346.0 kip-ft
Position of the heavier axle from the nearer support
18.60 ft
Maximum shear from the truck
37.2 kips
Moment from the lane load
128.0 kip-ft

The moving load calculator gives the absolute maximum moment and the maximum shear of a two-axle truck on a simple span, with the position of the axles and the effect of a uniform lane load.

How the calculation works

  • Enter the two axle loads, their spacing and the span of the simple beam.
  • Enter a uniform lane load if the design code adds one to the truck.
  • The calculator gives the position of the resultant, the absolute maximum moment, where the heavier axle is when it occurs, the maximum shear and the total moment.

Example

A truck with axles of 8 kips and 32 kips, 14 ft apart, crosses a simple span of 40 ft. The resultant of 40 kips is 2.8 ft from the heavier axle. The maximum moment occurs under the heavier axle when the midspan is midway between it and the resultant, so the heavy axle is 18.6 ft from the support, and M = 40 × (40 − 2.8)² / (4 × 40) = 346.0 kip-ft. The maximum shear is 37.2 kips. A lane load of 0.64 kip/ft adds 128.0 kip-ft, for a total of 474.0 kip-ft.

Why it matters

The calculator helps bridge and crane designers, engineers and students to size a beam under a moving vehicle, to compare the truck moment with a uniform load and to see where the critical position of the axles is.

Good to know

Use the real axle spacing and loads of the design vehicle, for example the 8 and 32 kip axles 14 ft apart of the H20 truck of the old AASHTO standard. Add the impact factor from the code to the truck, not to the lane load. Check the shear separately, with the heavy axle at the support. For long spans, the uniform lane load governs, and for short spans the axle loads do. A continuous beam or a skewed bridge needs a full analysis with influence lines, and the beam moment is then shared between the girders by a distribution factor.

The beam deflection calculator gives the deflection from the moment, the load combinations calculator combines dead and live loads, the crane runway beam calculator handles the wheel loads of a crane and the two span continuous beam calculator analyzes a continuous beam.

Frequently asked questions

What is the absolute maximum moment?

When a group of wheel loads crosses a beam, the moment at each section changes with the position of the loads. The absolute maximum moment is the largest value over all positions and all sections. For a simply supported span, it occurs under one of the loads, near the midspan, when the midspan lies midway between that load and the resultant of the loads on the span.

Why is it not at the midspan?

The largest moment under a single load is at the midspan. With two loads, the second one moves the point of the greatest moment toward the heavier load. The maximum then occurs under the heavier load, and the midspan is halfway between that load and the resultant, so the heavier load is a little off the midspan.

When does only one axle count?

If the span is short compared with the axle spacing, the second axle is off the beam when the first is at the midspan, and the maximum is that of a single axle, P × L / 4. The calculator takes the larger of the two cases and says where the heavy axle is when it happens.

What does the calculator leave out?

The calculator leaves out the impact factor, the distribution of the wheel loads between beams, trucks with three or more axles, two trucks side by side, and continuous spans. The HL-93 truck of AASHTO has three axles and needs a separate calculation. Use the code values for the design.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.