Skip to content
Omnikalc

Crane lift calculator: load chart utilization and wind on a lifted load

Enter the weights of the load, the rigging and the hook block, the dynamic allowance, the chart capacity and the wind to get the hook load, the utilization of the chart, the wind force and the drift.

Updated on
Your inputs
lb

Value out of range

lb

Value out of range

lb

Value out of range

lb

Value out of range

mph

Value out of range

ft²

Value out of range

Value out of range

Results

Utilization of the crane chart

69.1 %

Within 75 % of the chart: a standard lift
Total load on the hook
20,100 lb
Design load with the dynamic allowance
22,110 lb
Wind force on the load
246 lb
Drift angle of the load from the wind
0.70 °

The crane lift calculator gives the total load on the hook, the design load, the utilization of the crane chart, the wind force on the load and the drift angle of a mobile crane lift, from the weights of the load, the rigging and the hook block, the dynamic allowance, the chart capacity and the wind.

How the calculation works

  • Enter the weight of the load, of the rigging and of the hook block and the ball.
  • Choose the dynamic allowance and enter the chart capacity of the crane at the working radius and boom length.
  • Enter the wind speed, the exposed area and the drag coefficient of the load to get the wind force and the drift of the load.

Example

A load of 18,000 lb is lifted with 600 lb of rigging and a hook block of 1,500 lb, so the total load on the hook is 20,100 lb. With a dynamic allowance of 1.10, the design load is 22,110 lb. For a chart capacity of 32,000 lb at the radius, the utilization is 69.1 %. With a wind of 20 mph on an area of 200 ft² and a drag coefficient of 1.2, the wind force is 0.00256 × 20² × 200 × 1.2 = 246 lb, and the drift angle is 57.3 × 246 / 20,100 = 0.70°.

Why it matters

The calculator helps lift planners, riggers, crane operators, site managers and students to check a lift before the work, to see if it needs a critical lift plan, and to see how the wind on a large panel or a precast element can move the load.

Good to know

Weigh or verify the load, count all the rigging and the hook block, and read the chart for the real boom length, radius and outrigger setup. Use a tag line for the loads with a large area, check the ground under the outriggers, and stop the lifts when the wind is over the limit of the manufacturer. Hold a pre-lift meeting with the signal person, and never lift over people.

The crane mat bearing pressure calculator checks the ground under the outriggers, the sling angle calculator checks the rigging, the wind load calculator gives the pressure of the wind and the wind cladding pressure calculator gives the loads on panels.

Frequently asked questions

What does the utilization of the crane chart mean?

The utilization is the ratio of the load on the hook, with the allowance, to the capacity given by the load chart of the crane for the boom length, the radius and the configuration. The chart already includes a margin against tipping, and many owners define a lift above 75 to 90 % of the chart as a critical lift that needs a written plan, an engineer and a more careful supervision.

Which weights must be included?

The load on the hook includes the load itself, the rigging, such as the slings, the shackles and the spreader beam, the hook block and the ball, and sometimes the weight of the boom extension and of the jib, according to the chart. The weight of the load must be known from the drawings or from the scale, not assumed. A wrong weight is one of the main causes of the accidents of cranes.

Why is the dynamic allowance used?

A moving load adds forces because of the acceleration, the swing and the shock when the load is lifted from the ground or when the boom moves. The allowance of 10 to 25 % increases the load to cover these effects. A soft or uneven ground also increases the effective load at the outriggers, and the crane mats should be sized by the bearing pressure.

What are the limits of the calculator?

The calculator does not replace the load chart and the operator manual of the crane. It gives a simple estimate of the wind force from the speed and the area, and the real effect depends on the shape of the load, the gusts and the swing of the load, which can reduce the capacity of the crane. Always follow the maximum wind speed of the manufacturer, which is often 20 mph (9 m/s), and stop the lifts when the wind is higher.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.