Skip to content
Omnikalc

How much river rock for a dry creek bed?

Enter the length, width and depth of the creek bed: get the area, the river rock in cubic yards and tons, the landscape fabric and the edge boulders.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

in

Value out of range

ft

Value out of range

Results

River rock

1.1 cu yd

Rock weight

1.56 tons

Order 10% extra if the bed is dug unevenly, and mix rock sizes so the stones lock together
Creek bed area
90 sq ft
Landscape fabric, with 1 ft extra on each side
150 sq ft
Edge boulders
22

A dry creek bed is a channel lined with river rock that carries runoff after a storm and looks like a natural stream bed the rest of the time. This calculator works out the area, the volume and weight of river rock, the landscape fabric and the edge boulders.

How the calculation works

  • Area = length × average width
  • River rock = area × depth ÷ 12 ÷ 27, in cubic yards
  • Weight = cubic yards × about 1.4 tons
  • Fabric = (width + 2 ft) × length, for 1 ft of overlap on each side
  • Edge boulders = 2 sides × (length ÷ spacing, rounded up, + 1)

A creek 30 ft long and 3 ft wide covers 90 sq ft. With 4 in of river rock, you need about 1.1 cu yd, around 1.56 tons. Plan 150 sq ft of landscape fabric and 22 edge boulders spaced about 3 ft apart.

Choosing the rock

Size Use
Pea gravel to 1 in Filling gaps, a sandy look
1 to 3 in river rock The main bed
3 to 6 in cobbles Banks and the center of the flow
Boulders of 12 in and more Edges, bends and focal points

Mixing sizes gives a natural look and helps the stones lock together, so they stay put when water runs through. Weights per cubic yard vary with the stone and size, so ask your supplier how they sell it.

Building it

  • Follow the natural path water already takes, and give the channel a gentle, steady slope.
  • Dig a shallow, wider than deep trench with sloped sides, and remove the soil.
  • Lay landscape fabric to keep weeds out and the soil from washing into the rock.
  • Set the largest stones first at bends and edges, then fill with cobbles and river rock.
  • Finish with plants along the banks: grasses, sedges and shrubs soften the edges.

Where the water ends up

Make sure the creek carries water away from the house foundation and does not send it onto a neighbor’s property. It can end in a rain garden, a dry well or a planted low spot where water soaks in. In areas with heavy rain, size the channel generously and consider a perforated drain under the rock.

Frequently asked questions

How much river rock for a 30 ft dry creek bed?

About 1.1 cu yd for 3 ft wide and 4 in deep, around 1.56 tons.

How much does a cubic yard of river rock weigh?

Roughly 1.3 to 1.5 tons; this calculator uses 1.4.

Do I need landscape fabric under a dry creek bed?

It is recommended to limit weeds and keep soil out of the rock; here 150 sq ft.

How many edge boulders for a dry creek?

22 for 30 ft with a boulder every 3 ft on both sides.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.