Skip to content
Omnikalc

How much does it cost to drill a well?

Enter the well depth, the drilling and casing price per foot, the pump and pressure tank, the electrical and plumbing hookup, the water test and the permit: get the drilling cost, the total and the total per foot.

Updated on
Your inputs
ft

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

Results

Total cost

$14,100

Total per ft

$70.50

Depth is the big unknown: ask a local driller about neighboring wells, test the water for bacteria and nitrates before drinking it, and check setback rules from septic systems
Drilling
$10,000

This calculator gives estimates for education and planning. It is not investment, tax or legal advice; for decisions about your own situation, talk to a qualified financial professional. More than 40 million Americans get their drinking water from a private well. Drilling a new well is priced mostly by the foot, and the depth you need depends on the local geology, so the final bill can vary a lot even between neighbors. On top of the drilling and casing come the pump, the pressure tank, the electrical and plumbing hookup to the house, a water test and the permit. This calculator adds those parts and shows the total per foot.

How the calculation works

  • Drilling = well depth × drilling and casing price per foot
  • Total cost = drilling + pump and pressure tank + hookup + water test + permit
  • Total per foot = total ÷ depth

Drilling a 200 ft well at $50 per foot costs $10,000. A $2,500 pump and pressure tank, $1,000 of hookup, a $200 water test and a $400 permit bring the total to $14,100, or $70.50 per foot.

Typical prices

Item Typical price
Drilling and casing, residential $25 to $65 per ft
Drilling in hard rock $45 to $100 per ft
Submersible pump and pressure tank $1,500 to $4,000
Trenching and hookup to the house $500 to $3,000
Basic water test $50 to $300
Permit $100 to $1,000
Water treatment system $500 to $5,000

How deep will it be?

Ask local drillers and your state’s well log database for the depth of nearby wells; that is the best predictor. Shallow wells are cheaper but more exposed to surface contamination and drought. Deeper wells cost more to drill and need a stronger pump, but usually deliver steadier, cleaner water.

After the well is drilled

Test the water for bacteria, nitrates, arsenic and other local concerns before drinking it, and again every year for bacteria. Keep the wellhead above ground and capped, respect setback distances from septic systems and fuel tanks, and plan for a new pump every 10 to 15 years.

Frequently asked questions

How much does it cost to drill a well?

About $14,100 for a 200 ft well at $50 per foot plus the pump, hookup, water test and permit, or $70.50 per foot.

How deep does a well need to be?

Most residential wells are 100 to 500 ft deep; nearby well logs are the best guide.

How much does a well pump cost?

A submersible pump and pressure tank usually cost $1,500 to $4,000 installed.

How often should well water be tested?

At least once a year for bacteria, and after flooding or repairs.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.