Skip to content
Omnikalc

How much does a well pump cost to run?

Enter the water used a day, the pump flow, the pump power and your electricity price: get the run time per day, the energy and cost per year and the electricity cost per 1,000 gallons.

Updated on
Your inputs
gal

Value out of range

gal/min

Value out of range

W

Value out of range

$

Value out of range

Results

Electricity cost per year

$25.85

Electricity per 1,000 gallons

$0.24

Short cycling wears a pump out: a correctly sized pressure tank lets it run longer and start less often; a sudden rise in run time can mean a leak
Run time per day
25 min
Energy per year
152 kWh

This calculator gives estimates for education and planning. It is not investment, tax or legal advice; for decisions about your own situation, talk to a qualified financial professional.

Homes on a private well rely on an electric pump to bring water up and keep the pressure tank full. The pump only runs while it refills the tank, so its cost depends on how much water you use, how fast the pump delivers it and how much power it draws. This calculator works out the daily run time, the yearly energy and cost, and the electricity cost per 1,000 gallons.

How the calculation works

  • Run time per day = water used ÷ pump flow
  • Energy per year = power ÷ 1,000 × run hours per day × 365
  • Cost per year = energy × price per kWh
  • Cost per 1,000 gallons = power ÷ 1,000 × (1,000 ÷ flow ÷ 60) hours × price

A 1,000 W pump delivering 12 gallons a minute runs about 25 minutes a day to supply 300 gallons. That uses about 152 kWh a year, $25.85 at $0.17, or about $0.24 of electricity per 1,000 gallons.

Typical figures

Item Typical value
Household use 80 to 100 gallons per person per day
Pump flow 5 to 20 gallons per minute
1/2 hp pump, power drawn 800 to 1,000 W
1 hp pump, power drawn 1,200 to 1,700 W

Deeper wells and higher pressure settings need more power for the same flow. Garden irrigation and filling a pool can multiply daily use in summer.

Signs of trouble

  • Short cycling: the pump turns on and off every few seconds, often because of a waterlogged or undersized pressure tank. It wears the motor out quickly.
  • Rising run time with no change in use can mean a leak in the pipes or a worn pump.
  • Sputtering faucets or low pressure can mean the water level in the well is dropping.

Saving water and energy

Fixing leaks, using low-flow fixtures and watering the garden in the morning reduce run time. A correctly sized pressure tank lets the pump run longer and start less often, which saves wear more than energy. If you add a large irrigation system, check that the pump and well can supply it.

Frequently asked questions

How long does a well pump run each day?

About 25 minutes to supply 300 gallons at 12 gallons a minute.

How much does a well pump cost to run?

About $25.85 a year for a 1,000 W pump running 25 minutes a day at $0.17.

What is the electricity cost per 1,000 gallons from a well?

About $0.24 for a 1,000 W pump delivering 12 gallons a minute.

Why does my well pump turn on and off quickly?

Short cycling usually points to a waterlogged or undersized pressure tank.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.