Skip to content
Omnikalc

Firestop through-penetration sealant quantity calculator

Enter the number of penetrations, the opening and pipe diameters, the sealant depth, the waste and the tube size to get the sealant per penetration, the total with waste and the tubes.

Updated on
Your inputs

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

%

Value out of range

fl oz

Value out of range

Results

Tubes to order

20

Area of the annular space
7.85 in²
Sealant per penetration
7.85 in³
Total sealant with waste
361.3 in³

The firestop through-penetration sealant quantity calculator gives the area of the annular space, the sealant per penetration, the total sealant with waste and the number of tubes to order for the firestopping of pipes through fire-rated walls and floors, from the diameters, the depth and the number of penetrations.

How the calculation works

  • Enter the number of penetrations, the diameter of the opening and the outside diameter of the pipe.
  • Enter the depth of the sealant, the waste and the size of a tube.
  • The calculator finds the sealant per penetration, the total with waste and the number of tubes.

Example

A 4 in pipe with an outside diameter of 4.5 in goes through a 5.5 in hole, so the annular space is π / 4 × (5.5² − 4.5²) = 7.85 in². With a sealant depth of 1 in, each penetration takes 7.85 in³. For 40 penetrations and 15 % of waste, the total is 361.3 in³. A tube of 10.1 fl oz holds 18.2 in³, so 20 tubes are needed.

Why it matters

The calculator helps firestop contractors, estimators, general contractors and inspectors to estimate the quantity of sealant for the penetrations of a project, to order the right number of tubes, and to compare the effect of the annular space on the material.

Good to know

Install the firestop only with the system of the listing, and check the annular space of each penetration before the sealant. Keep a log of the penetrations with the photographs and the number of the system, as the inspector will ask for it. Do not let the other trades to add a cable or a pipe in a sealed opening without a new firestop.

The spray-applied fireproofing calculator gives the thickness and the quantity of the fireproofing of steel, the joint sealant calculator gives the sealant of a movement joint, the spray foam calculator estimates an insulation job and the wall framing calculator counts the studs of a wall.

Frequently asked questions

What is a firestop?

A firestop is a system that seals the openings made in a fire-rated wall or floor for the pipes, the cables and the ducts, so that the fire and the smoke cannot pass through the opening. The system is tested with the penetrating item, the opening and the fire rating, and it is listed. A typical system has a mineral wool packing in the annular space and a sealant on its surface.

How is the quantity of sealant found?

The annular space is the area between the opening and the pipe. Its volume is the area times the depth of the sealant, which is given in the listing of the system, often 1/2 in to 1 in. The total is the volume of one penetration times the number of penetrations, plus an allowance for waste. The number of tubes is found with the volume of a tube.

Why must the listed system be followed?

The performance of a firestop depends on the details of the tested system: the maximum annular space, the type of pipe, the depth and the product of the sealant, the packing, and the rating of the assembly. A different product or a larger opening can fail in a fire. The listing, such as the UL system number, is the document which gives the right details.

What are the limits of the calculator?

The calculator gives the volume of sealant for round penetrations with a concentric pipe. It does not take into account the packing, the sealant on both sides of the wall, the cables and the ducts, the pipe that is not centered, the thickness of the insulation, the movement of the pipe or the rating of the system. The product and the depth must come from the listing.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.