Skip to content
Omnikalc

Spray-applied fireproofing thickness and quantity calculator

Enter the fire rating, the weight and the heated perimeter of the beam, the constants of the design, the length and the waste to get the thickness, the sprayed area and the material.

Updated on
Your inputs
lb/ft

Value out of range

in

Value out of range

Value out of range

Value out of range

ft

Value out of range

lb/ft³

Value out of range

%

Value out of range

Results

Specified thickness

1.750 in

W/D ratio of the beam
0.542 lb/ft/in
Calculated thickness
1.71 in
Sprayed area
4,800 ft²
Material with waste
10,500 board ft
Weight of material
13,125 lb
Bags of 50 lb
263

The spray-applied fireproofing thickness and quantity calculator gives the W/D ratio, the thickness, the sprayed area, the quantity of material and the number of bags for the fireproofing of steel beams, from the fire rating, the weight and the heated perimeter of the beam and the constants of the listed design.

How the calculation works

  • Choose the fire rating and enter the weight and the heated perimeter of the steel beam.
  • Enter the two constants of the listed design, the total length of the beams, the density and the waste.
  • The calculator finds the thickness, the sprayed area, the quantity of material and the number of bags.

Example

A beam of 26 lb/ft with a heated perimeter of 48 in has a W/D ratio of 0.542. For a 2-hour rating and constants of 1.05 and 0.60, the thickness is 2 / (1.05 × 0.542 + 0.6) = 1.71 in, which is specified as 1.750 in. For 1,200 ft of beams, the sprayed area is 4 × 1,200 = 4,800 ft². With 25 % of waste, the material is 10,500 board feet, or 13,125 lb at 15 lb/ft³, that is 263 bags of 50 lb.

Why it matters

The calculator helps fireproofing contractors, estimators, steel detailers and students to estimate the thickness and the quantity of the spray-applied fireproofing of a steel frame, to compare ratings and sections, and to order the material and the labor.

Good to know

Check the thickness and the density of the fireproofing on the site with the tests of the standard, and fireproof the steel only after the inspection of the connections and of the welds. Protect the sprayed steel from the damage of the following trades, and repair the places where the material is removed. Always use the listed design for the final thickness.

The timber char depth and fire rating calculator gives the fire resistance of a wood member, the spray foam calculator estimates an insulation job, the steel column capacity calculator checks a column and the web shear buckling calculator checks a girder.

Frequently asked questions

What is spray-applied fireproofing?

Spray-applied fire-resistive material, or SFRM, is a cementitious or a mineral fiber mix that is sprayed on the steel beams, columns and decks. It insulates the steel and slows its heating in a fire, so that the steel keeps its strength for the time of the rating, often 1, 2 or 3 hours. The thickness required for each member is given by a tested and listed design.

What is the W/D ratio?

The W/D ratio is the weight of the steel member per foot of length divided by the heated perimeter of its section, in inches. A heavy member with a small perimeter heats slowly and needs less fireproofing than a light member with a large perimeter. The listed designs give the thickness as a function of the W/D ratio and of the rating, with a formula in which the constants depend on the material.

How is the quantity of material found?

The sprayed area is the heated perimeter times the length of the member. The volume is this area times the thickness, in board feet when the area is in square feet and the thickness in inches, and an allowance is added for the overspray and the waste. The weight of the dry material is found from its density, and the number of bags from the weight of a bag.

What are the limits of the calculator?

The calculator uses the form of the formula of the listed designs with the constants that you enter. The real thickness must come from the listing of the manufacturer, which depends on the material, the density, the type of member and the rating. The calculator does not take into account the bond strength, the minimum thickness, the individual and the average thickness limits or the fireproofing of the columns and of the decks.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.