Skip to content
Omnikalc

Fixed-end moments of a beam calculator

Enter the span, the uniform, point and triangular loads and the settlement of a support to get the fixed-end moments at both ends of a beam, in total and for each load, for the slope-deflection method.

Updated on
Your inputs
ft

Value out of range

kip/ft

Value out of range

kips

Value out of range

ft

Value out of range

kip/ft

Value out of range

in

Value out of range

ksi

Value out of range

in⁴

Value out of range

Results

Fixed-end moment at A (total)

114.6 kip-ft

Fixed-end moment at B (total)

60.0 kip-ft

Uniform load, each end
50.0 kip-ft
Point load, at A
28.8 kip-ft
Point load, at B
19.2 kip-ft
Triangular load, at A
10.7 kip-ft
Triangular load, at B
16.0 kip-ft
Settlement, at A (at B it is the opposite)
25.2 kip-ft

The fixed-end moments calculator gives the moments at the ends of a fixed beam for a uniform load, a point load, a triangular load and the settlement of a support, in total and for each load, for the slope-deflection method.

How the calculation works

  • Enter the span and the loads: a uniform load, a point load with its position, a triangular load with its peak at B, and the settlement of support B.
  • Enter the modulus and the moment of inertia for the effect of the settlement.
  • The calculator gives the fixed-end moments at A and B, in total and for each load, as hogging moments.

Example

A beam of 20 ft has a uniform load of 1.5 kip/ft, a point load of 10 kips at 8 ft from A, a triangular load of 0.8 kip/ft at its peak at B and a settlement of 0.1 in at B, with E = 29,000 ksi and I = 1,000 in⁴. The uniform load gives wL²/12 = 50.0 kip-ft at each end. The point load gives 28.8 kip-ft at A and 19.2 kip-ft at B, the triangular load 10.7 and 16.0 kip-ft and the settlement ±25.2 kip-ft. The totals are 114.6 kip-ft at A and 60.0 kip-ft at B.

Why it matters

The calculator helps structural engineers, students and anyone who analyses a continuous beam or a frame by hand to get the starting moments of the slope-deflection or moment distribution method, and to check the results of a program.

Good to know

Enter the load with its sign and position as it acts, and check that the point load lies between the supports. The moments are hogging at both ends for gravity loads, so for the analysis of a frame keep the sign convention of your method: in slope-deflection, a clockwise end moment is positive and the fixed-end moment at the left end of a downward load is negative. The settlement effect uses EI of the member, so it is large for a stiff beam. Add the fixed-end moments of the loads before you release the joints.

The two-span continuous beam calculator solves a continuous beam, the beam deflection calculator gives deflections, the moment of inertia calculator gives section properties and the two-way slab calculator distributes the static moment of a slab.

Frequently asked questions

What is a fixed-end moment?

A fixed-end moment is the moment at the end of a beam whose ends are completely fixed against rotation, when the loads act on it. It is the first step in the slope-deflection and moment distribution methods: each member is first treated as fixed, and then the joints are released to rotate. The fixed-end moments of the members at a joint give the unbalanced moment to distribute.

What are the formulas?

For a uniform load w, the moment is wL²/12 at each end. For a point load P at a from A and b from B, it is Pab²/L² at A and Pa²b/L² at B. For a triangular load with its peak w at B, it is wL²/30 at A and wL²/20 at B. For a settlement Δ of B, it is 6EIΔ/L² at both ends, with opposite effect on the two.

How is the sign defined?

The calculator gives the moments in terms of hogging, that is tension at the top of the beam, which is the effect of gravity loads at both ends. A settlement of B increases the hogging at A and reduces it at B, since the chord of the beam rotates. A negative value therefore means sagging.

What does the calculator leave out?

The calculator leaves out a partial uniform load, a moment load, a thermal gradient and a variable section. It adds the effects by superposition, which is valid for a beam of constant section with linear behavior. Use the end shears and the span moments from a separate calculation.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.