Skip to content
Omnikalc

Flexible pavement ESAL capacity calculator: how much traffic an asphalt pavement structure can carry

Enter the layer thicknesses and coefficients, the drainage, the subgrade modulus, the reliability and the traffic to get the structural number, the allowable ESALs, the design life and the margin over the 20-year traffic.

Updated on
Your inputs
in

Value out of range

in

Value out of range

in

Value out of range

Value out of range

Value out of range

Value out of range

psi

Value out of range

Value out of range

%

Value out of range

Results

Design life under the traffic

15.3 years

The pavement needs rehabilitation before 20 years
Structural number SN of the pavement
4.20
Allowable 18-kip ESALs (AASHTO 1993)
3,809,648 ESALs
ESALs over 20 years
5,374,075 ESALs
Allowable ESALs over the 20-year traffic
0.71
The capacity is below the 20-year traffic

The flexible pavement ESAL capacity calculator gives the structural number of an asphalt pavement from its layers and the allowable traffic in ESALs with the AASHTO 1993 equation, then the design life under a growing traffic and the margin over the 20-year traffic.

How the calculation works

  • Enter the thickness and the layer coefficient of the asphalt surface, the granular base and the subbase.
  • Choose the drainage coefficient m and enter the resilient modulus of the subgrade, the reliability and the terminal serviceability.
  • Enter the ESALs of the first year and the annual growth of the traffic.
  • The calculator finds the structural number SN = a1 D1 + a2 D2 m2 + a3 D3 m3, the allowable ESALs with the AASHTO 1993 equation and the design life under the growing traffic.

Example

A pavement has 4 in of asphalt (a1 = 0.44), 8 in of base (0.14) and 12 in of subbase (0.11) with good drainage (m = 1.0) on a subgrade of 8,000 psi, with 90% reliability and a terminal serviceability of 2.5. The structural number is 0.44 × 4 + 0.14 × 8 + 0.11 × 12 = 4.20. The AASHTO equation gives an allowable 3,809,648 ESALs. With 200,000 ESALs in the first year growing at 3%, the traffic reaches that value in 15.3 years, while the traffic of 20 years is 5,374,075 ESALs.

Why it matters

The calculator helps civil and pavement engineers, road agencies, contractors and students to check if a pavement structure is adequate for the traffic, to compare alternatives of thickness and to see the effect of the subgrade and the drainage. It is the forward check that complements a design nomograph.

Good to know

Use the layer coefficients and the subgrade modulus of your agency, from the tests of CBR or of the resilient modulus, and the traffic from a traffic study with the truck factors. Use a reliability of 85 to 95% for the main roads. Consider the frost, the moisture and the construction variability. The pavement design of a real road must follow the method of the agency and be approved by an engineer.

The asphalt calculator gives the tonnage of the mix, the CBR subgrade modulus calculator converts the CBR to a modulus, the compaction calculator covers soil compaction and the concrete volume calculator covers rigid pavement quantities.

Frequently asked questions

What is the structural number?

The structural number SN is the index of the strength of a flexible pavement in the AASHTO method. It is the sum of the thicknesses of the layers, in inches, multiplied by a layer coefficient that expresses the relative strength of the material, and a drainage coefficient for the unbound layers: SN = a1 D1 + a2 D2 m2 + a3 D3 m3. A hot-mix asphalt has a coefficient of about 0.44, a crushed stone base 0.14 and a granular subbase 0.11.

What are ESALs?

An ESAL is an equivalent single axle load of 18,000 lb (80 kN). The damage that the axles of different weights do to the pavement is converted to the damage of this standard axle, using the load equivalency factors, which grow with the fourth power of the axle load. The traffic of a road is expressed as the cumulative ESALs over the design life, and a heavy truck can count as 1 to 3 ESALs while a car counts as almost zero.

What does the AASHTO 1993 equation include?

The equation gives the number of ESALs W18 that the pavement can carry before it falls to the terminal serviceability, from the structural number, the subgrade resilient modulus, the loss of serviceability, the reliability level and the overall standard deviation, here 0.45. A higher reliability, such as 95% for a major road, reduces the allowable traffic. The equation is empirical, and it comes from the AASHO Road Test of 1958 to 1960.

How is the design life found?

With a growth rate g, the cumulative ESALs after n years are W1 ((1 + g)^n − 1) / g, with W1 the ESALs of the first year. Setting this equal to the allowable ESALs and solving for n gives the design life. The result is for an unmaintained pavement with the given assumptions, and a pavement with regular maintenance lasts longer. The AASHTO 1993 method is being replaced by the mechanistic-empirical design in many agencies.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.