Skip to content
Omnikalc

Pedestrian crossing time calculator: clearance interval of a signalized crosswalk

Enter the crossing distance, the walking speed, the walk interval and the yellow and all-red intervals to get the pedestrian change interval, the total pedestrian phase and the minimum green time.

Updated on
Your inputs
ft

Value out of range

s

Value out of range

s

Value out of range

s

Value out of range

Results

Minimum green of the parallel vehicle phase

15.2 s

Pedestrian change interval (flashing don’t walk)
13.7 s
Total pedestrian phase (walk + change)
20.7 s

The pedestrian crossing time calculator gives the pedestrian change interval, the total pedestrian phase and the minimum green time of the parallel vehicle phase for a signalized crosswalk, from the crossing distance, the walking speed and the walk interval.

How the calculation works

  • Enter the crossing distance, from the curb to the far curb or to a median that is wide enough for the pedestrians.
  • Choose the walking speed of the pedestrians who use the crossing, and enter the walk interval, the yellow and the all-red of the vehicle phase.
  • The calculator finds the pedestrian change interval, the total pedestrian phase and the minimum green of the parallel vehicle phase.

Example

A crosswalk is 48 ft long and the design walking speed is 3.5 ft/s. The pedestrian change interval is 48 / 3.5 = 13.7 s. With a walk interval of 7 s, the total pedestrian phase is 7 + 13.7 = 20.7 s. The vehicle phase beside has a yellow of 4 s and an all-red of 1.5 s, which give some time to the pedestrians, so the minimum green is 20.7 − 4 − 1.5 = 15.2 s.

Why it matters

The calculator helps traffic engineers, signal technicians, city planners and students to check the timing of a pedestrian phase in a first design, to compare walking speeds and to see how the width of the street changes the signal timing.

Good to know

Measure the crossing distance on site, from the curb ramp to the far curb, and use a lower walking speed near schools, senior residences and hospitals. Check the timing with the push button and the countdown signals. Review the timing when the street is widened. Where a median island is used, consider timing each half of the crossing separately, so that the cycle can be shorter for the vehicles.

The traffic signal cycle length calculator gives the cycle, the stopping sight distance calculator and the stopping distance calculator check the visibility and the braking, and the vertical curve calculator checks the sight distance at a crest.

Frequently asked questions

What is the pedestrian change interval?

The pedestrian change interval, shown by the flashing upraised hand (flashing don’t walk), is the time that a pedestrian who left the curb at the end of the walk signal has to reach the far curb or a median. The MUTCD calculates it with the crossing distance divided by a walking speed of 3.5 ft/s (1.1 m/s), and with a lower speed, such as 3.0 ft/s, where there are many older people, children or people with disabilities.

What is the walk interval?

The walk interval, with the walking person signal, lets the pedestrians start to cross. The MUTCD gives a minimum of 7 seconds, and the time can be lowered to 4 seconds if the number of pedestrians is low. The walk interval is followed by the pedestrian change interval. The total pedestrian phase is the sum of the two, and it must fit in the vehicle phase that runs parallel to the crosswalk.

How does the vehicle phase relate to it?

The pedestrian change interval can end at the end of the yellow, and the all-red interval is a part of the clearance of the intersection. In this simple model, the parallel vehicle green must be at least the total pedestrian phase minus the yellow and the all-red intervals. In practice, the minimum green is often larger, to give a good level of service to the vehicles, and the pedestrians have to cross the whole street.

What are the limits of the calculator?

The calculator gives the basic timing of a pedestrian phase. It does not include the push button delay, the leading pedestrian interval, the exclusive pedestrian phases, the accessible pedestrian signals, the pedestrian volume and the platoons of pedestrians, the median islands that need a second push, or the local standards. The signal timing must be made by a traffic engineer.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.