A pegboard wall keeps tools visible and within reach above a workbench or along a garage wall. This calculator works out the panels you need, the holes they give you, the furring strips and screws to mount them, and the hooks for your tools.
How the calculation works
- Wall area = width × height
- Panels = wall area ÷ panel area, rounded up
- Holes = wall area ÷ (hole spacing²)
- Furring strips = one row every so many inches up the wall, plus one, each as long as the wall is wide
- Screws = furring strip rows × studs crossed
- Hooks = tools × hooks per tool
An 8 × 4 ft tool wall is 32 sq ft, or 4 panels of 2 × 4 ft. With holes every 1 in, that is 4,608 holes. Furring strips every 16 in make 4 rows, or 32 ft of strip, and with studs 16 in apart each strip crosses 7 studs, so you need 28 screws. For 30 tools at 1.5 hooks each, plan about 45 hooks.
Choosing pegboard
| Type | Holes | Best for |
|---|---|---|
| 1/8 in hardboard | 3/16 in holes, 1 in apart | light hand tools, crafts |
| 1/4 in hardboard | 1/4 in holes, 1 in apart | most garage tools |
| Metal pegboard | various | heavy tools, damp garages |
| Plastic panels | various | light use, easy to clean |
Match the hook size to the board: 1/8 in hooks wobble in 1/4 in holes.
Mounting tips
- Leave space behind the board. Hooks need about 1/2 in behind the panel to go in, so mount it on 1 × 2 or 1 × 3 furring strips or spacers.
- Screw into studs. Run the strips across the studs and fix the board to the strips, or use spacers screwed through into the studs.
- Put strips at every panel edge, so the joints do not flex.
- Use hook locks or zip ties so hooks do not fall out when you lift a tool.
- Outline each tool with a marker so you can see at a glance what is missing.
- Keep the heaviest tools low and near a stud, and leave a clear zone above the workbench for the tools you use most.