Skip to content
Omnikalc

Rack and pinion travel and force calculator

Enter the pinion teeth, the module, the rotation, the speed and the load to get the travel, the linear speed, the torque, the power and the separating force.

Updated on
Your inputs

Value out of range

mm

Value out of range

°

Value out of range

rpm

Value out of range

N

Value out of range

°

Value out of range

Results

Rack travel per turn

125.66 mm

Pitch diameter of the pinion
40.0 mm
Rack travel for this rotation
31.42 mm
Linear speed of the rack
0.251 m/s
Pinion torque for this force
10.00 N·m
Mechanical power
125.7 W
Separating force between the teeth
182.0 N

The rack and pinion calculator gives the pitch diameter, the travel per turn, the travel for a rotation, the linear speed, the pinion torque, the power and the separating force of a rack and pinion drive.

How the calculation works

  • Enter the teeth of the pinion and the module.
  • Enter the rotation, the speed, the force on the rack and the pressure angle.
  • The calculator multiplies the pitch circumference by the rotation and the force by the pitch radius.

Example

A pinion of 20 teeth and module 2 mm has a pitch diameter of 40.0 mm and moves the rack by 125.66 mm per turn, 31.42 mm for the rotation entered. At 120 rpm the rack reaches 0.251 m/s. A force of 500 N needs 10.00 N·m and 125.7 W, and the teeth push the rack away with 182.0 N.

Why it matters

The calculator helps designers of linear axes, gates, steering racks, lifts and CNC machines who must size the pinion and the motor for a given travel, speed and load.

Good to know

Choose the module from the tooth force, not from the travel: a higher module gives stronger teeth. Use the same module and pressure angle on the rack and the pinion. The travel is exact only at the pitch line, so keep the mounting distance within the tolerance of the maker. Add backlash compensation for positioning and a safety factor of 1.5 to 2 on the tooth force. Grease or lubricate the teeth, and protect them from chips. For a long rack, a helical gearing runs more smoothly and quietly, but adds an axial force. Check also the wear of the teeth and the stiffness of the mounting.

The spur gear calculator gives the geometry of the pinion, the gear ratio calculator handles pairs of gears, the lead screw calculator covers the other common linear drive and the planetary gear calculator reduces the motor speed before the pinion.

Frequently asked questions

How far does the rack move for each turn of the pinion?

The rack moves by the pitch circumference of the pinion, which is π × m × Z, where m is the module in millimetres and Z the number of teeth. A pinion of 20 teeth and module 2 has a pitch diameter of 40 mm, so the rack moves 125.7 mm per turn. The travel is proportional to the angle, so a quarter of a turn moves it 31.4 mm.

How do I find the pinion torque for a given force?

The torque is the force on the rack times the pitch radius of the pinion, T = F × d / 2. With 500 N and a pitch diameter of 40 mm, the torque is 10 N·m. A larger pinion needs more torque for the same force but moves the rack farther per turn, so size the pinion for the speed and the motor torque together.

What is the separating force?

The tooth force acts along the pressure angle, not along the rack. In addition to the useful force along the rack, it produces a radial force F × tan(α) that pushes the rack away from the pinion. At 20 degrees it is 36 % of the useful force. The guide and the bearing of the rack must absorb it.

What accuracy can I expect from a rack and pinion?

Standard ground racks have a pitch error of a few hundredths of a millimetre per tooth, plus backlash of 0.02 to 0.1 mm. Preloaded dual pinions remove the backlash. For long strokes, racks are joined end to end, and the joint must keep the pitch continuous.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.