Skip to content
Omnikalc

Reshoring and shoring load sharing calculator for multi-story slabs

Enter the slab thickness, the formwork, the construction live load, the number of supporting slabs and their capacity to get the share of the load and the ratio to the capacity.

Updated on
Your inputs
in

Value out of range

psf

Value out of range

psf

Value out of range

Value out of range

psf

Value out of range

Results

Ratio of the load to the capacity

0.77

The supporting slabs can carry the shoring load
Self-weight of a slab
100.0 psf
Construction load of the new slab
160.0 psf
Share carried by each supporting slab
53.3 psf
Total load on a supporting slab
153.3 psf

The reshoring and shoring load sharing calculator gives the self-weight of a slab, the construction load of the new slab, the share carried by each supporting slab, the total load on a supporting slab and the ratio to its capacity for the shores and reshores of a multi-story building.

How the calculation works

  • Enter the thickness of the slabs, the weight of the formwork and the construction live load.
  • Enter the number of slabs which support the new pour through the shores and the reshores and their capacity.
  • The calculator finds the load of the new slab, the share of each supporting slab, the total load and the ratio.

Example

A slab of 8 in weighs 8 × 12.5 = 100 psf. With 10 psf of formwork and 50 psf of construction live load, the new level puts 160 psf on the shores. If the load is shared by 3 slabs, each carries 53.3 psf in addition to its own weight, that is 153.3 psf in total. For a capacity of 200 psf, the ratio is 0.77.

Why it matters

The calculator helps concrete contractors, formwork engineers, site engineers and students to check if the slabs below a new pour can carry the load through the shores and the reshores, and to see how the number of levels of reshores and the live load change the result.

Good to know

Install the reshores before the shores are removed and keep them tight, but not loaded by a jack. Put the reshores of the different levels one above the other, so that the load goes straight down. Do not remove the shores or the reshores before the concrete has reached the strength found by tests, and follow the plan of the engineer.

The slab shoring spacing calculator sizes the shores of a slab, the concrete formwork calculator estimates the forms, the formwork lateral pressure calculator checks the walls and the one-way slab minimum thickness calculator gives the thickness of a slab.

Frequently asked questions

What is reshoring?

Reshoring is the placing of posts under a slab after the forms and the shores are removed, to carry the construction loads of the floors above. The reshores let the slab take the loads in a way that does not overload it before it has its full strength. In a multi-story building, a few levels of shores and reshores below the new slab share the weight of the pour.

How is the load shared between the slabs?

In the simple method of the equal stiffness, the supporting slabs have the same stiffness and the shores and the reshores are rigid, so the weight of the new slab, the formwork and the live load is shared equally between them. Each supporting slab then carries its own weight and an equal part of the new load. The calculator uses this simple rule.

Why does the age of the slab matter?

A young slab has not reached its design strength, so its capacity is lower than the one for the full service. The capacity used for the check is the one at the age of the slab when the load is applied. A slab that is only a few days old has a much smaller capacity than one of 28 days, and a test of the strength of the concrete is used to find it.

What are the limits of the calculator?

The calculator uses the equal sharing between the slabs and a single capacity. It does not model the real stiffness of the shores and of the slabs, the time the reshores stay in place, the cracking of the young slabs, the punching shear at the columns, or the removal sequence. The shoring and reshoring plan must be made by an engineer for the real structure.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.