Skip to content
Omnikalc

Roller chain drive calculator: chain length, center distance and speed of a sprocket drive

Enter the sprocket teeth, the chain pitch, the center distance and the speed to get the chain length in links, the actual center distance, the driven speed, the chain speed and the pitch diameter of the sprocket.

Updated on
Your inputs

Value out of range

Value out of range

Value out of range

rpm

Value out of range

Results

Chain length (even number of links)

96 links

Speed of the driven sprocket
200.0 rpm
Speed ratio
3.00
Chain speed
637.5 ft/min
Chain speed within the range of manual or drip lubrication
Pitch diameter of the small sprocket
4.082 in
Actual center distance
22.89 in

The roller chain drive calculator finds the chain length in links, the actual center distance, the driven speed, the chain speed and the pitch diameter of the sprockets from the number of teeth, the chain pitch, the wanted center distance and the speed.

How the calculation works

  • Enter the number of teeth of the small and large sprockets and choose the chain pitch.
  • Enter the desired center distance in pitches (30 to 50 pitches is the usual range) and the speed of the small sprocket.
  • The calculator finds the chain length in pitches, Lp = 2C + (N1 + N2) / 2 + [(N2 − N1) / 2π]² / C, and rounds it up to an even number of links, which avoids an offset link.
  • It gives the actual center distance for that length, the driven speed, the chain speed and the pitch diameter of the small sprocket.

Example

A drive has a 17-tooth pinion and a 51-tooth sprocket with 0.75 in pitch chain, a wanted center distance of 30 pitches, and a pinion speed of 600 rpm. The chain length is 2 × 30 + 34 + 29.28 / 30 = 94.98 pitches, or 96 links (even). The actual center distance is 30.52 pitches, or 22.89 in. The driven speed is 200.0 rpm (ratio 3.00), the chain speed is 637.5 ft/min and the pitch diameter of the pinion is 4.082 in.

Why it matters

The calculator helps machine designers, maintenance engineers, farm and workshop owners and students to lay out a chain drive, to order the right chain length and to check the speeds and the lubrication needs. It is a first layout before the choice of the chain from the power rating.

Good to know

Select the chain from the power rating of the manufacturer’s tables, with a service factor. Keep at least 17 teeth on the small sprocket and an arc of contact of 120° or more. Provide a way to adjust the center distance or a tensioner. Align the sprockets in the same plane, and lubricate the chain according to its speed.

The bike chain length calculator covers bicycle drives, the gear ratio calculator covers speed ratios, the horsepower and torque calculator converts the power to torque and the belt length calculator covers belt drives.

Frequently asked questions

How is the chain length computed?

The length in pitches is Lp = 2C + (N1 + N2) / 2 + [(N2 − N1) / (2π)]² / C, where C is the center distance in pitches and N1 and N2 are the numbers of teeth. The result is rounded up to an even number of links, because an odd number needs an offset link, which is weaker. After rounding, the actual center distance is recomputed from the real length.

What is a good center distance?

A center distance of 30 to 50 pitches is the usual target. A shorter one wraps too few teeth on the small sprocket and increases the load per tooth, while a longer one makes the chain sag and whip. The arc of contact on the small sprocket should be at least 120°, and the chain should have a tensioner or an adjustable center distance to take up the wear.

How many teeth should the small sprocket have?

A small sprocket of fewer than 17 teeth makes the chain move in a jerky way, because of the chordal action, and wears faster at high speed. For smooth running, use 17 teeth or more, and prefer an odd number of teeth with an even number of links so that the wear is spread. The large sprocket is rarely above 120 teeth, since a small stretch of the chain then makes it ride up on the teeth.

What chain speed is acceptable?

The calculator marks chain speeds above 2,500 ft/min (12 m/s), where an oil bath or pressure lubrication is needed instead of manual oiling or drip. For slow chains under about 100 ft/min, manual lubrication is enough, and the choice of the chain is by strength and not by wear. The rated power of the chain must be checked in the manufacturer’s tables.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.