Skip to content
Omnikalc

V-belt drive calculator: how many belts you need for a power transmission

Enter the power, service factor, pulley diameters, speed and center distance to get the design power, the arc of contact and its correction, the belt speed, the belt length and the number of V-belts needed.

Updated on
Your inputs
hp

Value out of range

rpm

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

hp

Value out of range

Results

Number of belts needed

4

Design power (with service factor)
13.00 hp
Arc of contact on the small pulley
165.7 °
Good arc of contact
Arc of contact correction factor
0.966
Rated power per belt, corrected
3.38 hp
Belt speed
1,833 ft/min
Belt speed within the normal range
Belt pitch length
70.4 in

The V-belt drive calculator gives the number of V-belts needed to transmit a power from the design power, the service factor, the arc of contact on the small pulley, the rated power per belt, the belt speed and the belt length for a given center distance.

How the calculation works

  • Enter the power to transmit and choose the service factor that fits the driven machine and the type of motor.
  • Enter the speed of the small pulley, the pitch diameters of both pulleys and the center distance.
  • Enter the rated power per belt read from the belt manufacturer’s table for the belt section, the small pulley diameter and its speed.
  • The calculator corrects the rated power for the arc of contact on the small pulley, and divides the design power by it to get the number of belts. It also gives the belt speed and the belt length.

Example

A 10 hp motor at 1,750 rpm drives a compressor through a 4 in pulley and a 10 in pulley at 24 in center distance. With a service factor of 1.3, the design power is 13.00 hp. The arc of contact is 180 − 57.3 × (10 − 4) / 24 = 165.7°, so the correction factor is 1.25 × (1 − 5^(−0.92)) = 0.966. A belt rated at 3.5 hp carries 3.38 hp, and 13.00 / 3.38 gives 4 belts. The belt speed is 1,833 ft/min and the belt length is 70.4 in.

Why it matters

The calculator helps maintenance engineers, machine designers, farm and workshop owners and students to size a belt drive, to check an existing drive that slips or wears quickly and to see the effect of the center distance and the service factor. It gives a good first estimate before the manufacturer’s catalog selection.

Good to know

Read the rated power from the manufacturer’s table for the exact belt section and pulley size. Keep the arc of contact above 140° if possible. Replace all the belts of a set together. Check the belt tension after the first hours of use, and align the pulleys, since a misalignment of one degree shortens the life of the belts.

The belt length calculator gives the length for two pulleys, the gear ratio calculator covers the speed ratio, the horsepower and torque calculator converts the power and the motor current calculator checks the motor supply.

Frequently asked questions

How many V-belts do I need?

Divide the design power, which is the transmitted power times the service factor, by the power that one belt can carry. The power per belt comes from the manufacturer’s table for the section, small pulley size and speed, and it is corrected for the arc of contact and for the belt length. Round up to the next whole number. Using all the belts in a matched set keeps the load equally shared.

What is the service factor?

The service factor covers the real load on the drive. It is 1.1 for a smooth load such as a fan, 1.2 for pumps and light machines, 1.3 for compressors and conveyors and 1.5 or more for crushers, mills and any shock load. It is increased by 0.1 for each ten hours per day above eight, and for starts under load. A high service factor adds belts and extends the life of the drive.

Why does the arc of contact matter?

The belt transmits power by friction on the part of the small pulley that it wraps. A smaller arc gives less grip, so the power per belt is reduced by a correction factor, which is 1.0 at 180° and about 0.8 at 120°. Below 120°, a V-belt slips and wears quickly. A bigger center distance, a smaller speed ratio or an idler on the slack side increases the arc.

What is the maximum belt speed?

Standard V-belts run up to about 6,500 ft/min (33 m/s). At higher speeds, the centrifugal force reduces the contact pressure and the belt loses its grip, so narrow section or high-speed belts and balanced pulleys are used, up to 10,000 ft/min or more. A very low speed under 1,500 ft/min needs more belts for the same power, so a larger small pulley is better.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.