Skip to content
Omnikalc

Saw blade teeth per inch calculator

Enter the thickness of the material and the minimum number of teeth in the cut to get the minimum teeth per inch, the standard blade to use, the teeth actually in contact and the tooth pitch.

Updated on
Your inputs
in

Value out of range

TPI

Value out of range

Results

Minimum teeth per inch

6.0 TPI

Standard blade to use (next size up)

6 TPI

Teeth in the cut with the blade you have

5.0

Tooth pitch of the blade you have
0.100 in
The blade you have is suitable (1 = yes, 0 = no)
1
Thickest material the blade you have should cut
0.300 in

The saw blade teeth per inch calculator gives the minimum teeth per inch that keep enough teeth in the cut for a given material thickness, the standard blade to buy, the teeth actually in contact with the blade you have and its tooth pitch.

How the calculation works

  • Enter the thickness of the material and choose the teeth wanted in the cut.
  • Enter the teeth per inch of the blade you have.
  • Read the minimum TPI, the standard size and whether your blade is suitable.

Example

For material 0.5 in thick with at least 3 teeth in the cut, the minimum is 6.0 TPI, so the standard blade is 6 TPI. The blade you have, at 10 TPI, keeps 5.0 teeth in the cut with a pitch of 0.100 in, so the suitable flag is 1. It is meant for material up to 0.300 in thick.

Why it matters

The calculator helps woodworkers, metalworkers and model makers choose a bandsaw, scroll saw, jigsaw or hacksaw blade for the thickness of the stock, avoid stripped teeth on thin material and slow cuts in thick material, and check a blade on hand.

Good to know

The three-teeth rule is a starting point: soft and thick woods accept a coarse blade, and aluminum, brass and thin steel need a finer one to keep the teeth from catching. Reduce the feed rate as the number of teeth in the cut grows. A cut that is smooth but slow, or that burns, often means too many teeth, and tearing or stripped teeth mean too few. Keep thin material supported close to the blade and use a zero-clearance insert when you can.

The bandsaw blade length calculator sizes the blade, the router bit speed calculator sets speeds for other cutters, the tap drill size calculator relates threads per inch to holes and the resaw calculator plans thick cuts.

Frequently asked questions

What is the rule for the number of teeth?

A saw blade should have at least three teeth in contact with the material at any moment. With fewer teeth, the work can catch between teeth and the blade can strip them or break, especially on thin stock. With too many teeth, the gullets fill with chips, the blade heats and the cut is slow.

How is the minimum TPI computed?

Divide the number of teeth wanted in the cut by the thickness of the material in inches. A material of 1/2 inch with three teeth wanted needs 6 teeth per inch at least. A blade with more teeth gives a smoother cut but cuts more slowly, so the next standard size up is a good choice.

When should I use fewer teeth?

Thick wood and soft materials produce large chips that need big gullets, so a blade with 2 or 3 teeth in the cut and a coarse pitch is better. On hardwoods, plastics and metals, and in thin stock, use blades with 4 or more teeth in the cut, because the material is brittle or the cut needs to be clean.

Does this apply to all saws?

The rule applies to bandsaw blades, scroll saw blades, hacksaws, jigsaw blades and handsaws. For circular saw blades, the pitch is set by the number of teeth over the diameter and the speed, and the rule of three teeth is a minimum for safe cutting of the material depth.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.