The seismic base shear is the total horizontal force that an earthquake applies at the base of a building. The seismic base shear calculator applies the equivalent lateral force method of ASCE 7 to give the period, the seismic coefficient Cs and the base shear V from the weight, the site accelerations and the structural system.
How the calculation works
- Enter the effective seismic weight W of the building: the dead load plus the part of the live load, the partitions and the permanent equipment.
- Enter the design spectral accelerations SDS (short period) and SD1 (1 s) of the site from the seismic hazard map, the response modification coefficient R of the structural system and the importance factor Ie.
- Enter the height of the building and the type of structural system, to estimate the approximate period Ta = Ct hn^x.
- The calculator applies the equivalent lateral force procedure of ASCE 7: Cs = SDS / (R/Ie), limited above by SD1 / (T R/Ie) and below by 0.044 SDS Ie (and 0.01), and the base shear V = Cs W.
Example
A steel moment frame of 45 ft and 2,000 kips of seismic weight has SDS = 0.80 g, SD1 = 0.40 g, R = 8 and Ie = 1.0. The period is Ta = 0.028 × 45^0.8 = 0.588 s. The seismic coefficient from SDS is 0.80 / 8 = 0.1000, and the upper limit from SD1 is 0.40 / (0.588 × 8) = 0.0850, which governs because it is lower. The minimum is 0.044 × 0.80 = 0.0352. So Cs = 0.0850 and the base shear is V = 0.0850 × 2,000 = 169.9 kips, 8.5% of the weight.
Why it matters
The calculator helps structural engineering students and designers to get a first estimate of the seismic force on a building, to compare structural systems and heights, and to follow the steps of the code. It also shows which limit of Cs governs the result.
Good to know
Take SDS and SD1 from the seismic hazard map for the site and the soil class. Use a realistic seismic weight, including the dead load of the partitions, the equipment and the storage loads. Compare the base shear to the wind force: in some regions the wind governs the lateral design of low-rise buildings.
Related tools
The earthquake magnitude calculator relates the magnitude and the energy of a quake, the seismic wave velocity calculator gives the speed of the waves, the wind load calculator gives the other lateral load and the snow load calculator covers the roof load.