Skip to content
Omnikalc

Seismic wave velocity calculator: how fast do P and S waves travel in rock?

Enter the bulk modulus, the shear modulus, the density and the S–P time to get the P and S wave velocities, the Vp / Vs ratio and the distance to the earthquake.

Updated on
Your inputs
GPa

Value out of range

GPa

Value out of range

kg/m³

Value out of range

s

Value out of range

Results

P-wave velocity

5.93 km/s

S-wave velocity
3.33 km/s
Vp / Vs ratio
1.78
Typical of solid crustal rock
Poisson’s ratio
0.269
Distance to the earthquake
47.3 mi

When an earthquake happens, two main waves leave the source: the fast P wave and the slower S wave. Their speeds are set by the stiffness and the density of the rock. The seismic wave velocity calculator takes the bulk modulus, the shear modulus, the density and the S–P time, and gives the P-wave and S-wave velocities, the Vp / Vs ratio, Poisson’s ratio and the distance to the earthquake.

How the calculation works

  • Enter the bulk modulus, the shear modulus and the density of the rock, and the time difference between the arrival of the S wave and the P wave at a station.
  • The calculator gives the P-wave velocity, Vp = √((K + 4μ/3) / ρ), and the S-wave velocity, Vs = √(μ / ρ), both in kilometres per second.
  • It also gives the Vp / Vs ratio and Poisson’s ratio of the rock, which show whether it is solid or filled with fluid.
  • From the S–P time, it finds the distance to the earthquake: distance = (ts − tp) × Vp × Vs / (Vp − Vs). Three stations give the epicentre by triangulation.

Example

Granite-like rock has K = 55 GPa, μ = 30 GPa and a density of 2,700 kg/m³. The P wave travels at (55 + 40) × 10⁹ / 2,700 under a square root, which is 5.93 km/s, and the S wave at 3.33 km/s. The ratio Vp / Vs is 1.78 and Poisson’s ratio is 0.269. A station that records the S wave 10 s after the P wave is 47.3 mi (76.1 km) from the earthquake.

Why it matters

Seismology rests on these relations. They let students and engineers link the elastic properties of rock to the speed of waves, explain why the S wave shadow shows a liquid core, and locate an earthquake from a seismogram with the S–P rule. They also feed site studies, where the S velocity of the soil sets the earthquake risk of buildings.

Good to know

The formulas are for a homogeneous, isotropic and elastic material. The real Earth has layers, cracks, fluids and temperature gradients, and the velocity changes with depth, so rays curve. The distance from the S–P time uses a constant velocity and is accurate to about 10 % for local earthquakes. Real locations use travel-time tables for a velocity model.

The earthquake magnitude calculator measures the size of the quake, the Poisson’s ratio calculator gives another elastic constant, the Young’s modulus calculator describes stiffness in tension, and the speed of sound calculator covers waves in air.

Frequently asked questions

Why do P waves travel faster than S waves?

P waves are compressional: the rock is pushed and pulled in the direction of travel, and this depends on both the bulk and the shear modulus. S waves shake the rock sideways and depend only on the shear modulus. Because the shear modulus is smaller than the combined stiffness, S waves are slower, usually by a factor of about 1.7 in crustal rock.

Why can S waves not travel through liquids?

A liquid has no shear modulus, since it does not resist a sideways deformation. With μ = 0, the S velocity is zero. This is how seismologists found that the outer core of the Earth is liquid: S waves do not cross it, and a shadow zone appears on the opposite side of the planet after a large earthquake.

How does the S–P time give a distance?

The two waves leave the source together but at different speeds, so the gap between their arrivals grows with the distance. For crustal rock, the rule is about 8 km per second of delay. With three or more stations, circles of the computed distances meet at the epicentre, which is the method used before computers.

What does the Vp / Vs ratio tell us?

For most crustal rocks it is between 1.6 and 2.0, with 1.73 for a perfect solid (Poisson’s ratio of 0.25). Values above 2 point to fluids or partial melt, as near a volcano, and low values to gas-filled or quartz-rich rocks. It is a common tool to image magma chambers and fluids along faults.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.