A slatted wood divider separates a room without closing it: it marks an entry, screens a bed or a desk, and still lets light and air through. Planning one is mostly a matter of counting slats and choosing the gap, which sets how open or private it feels. This calculator works out the slats, the lumber and the openness.
How the calculation works
- Slats = (divider width + gap) ÷ (slat width + gap), rounded down
- Slat lumber = slats × divider height
- Top and bottom rails = 2 × divider width
- Share left open = 1 − slats × slat width ÷ divider width
- Space left at each end = (width − slats × slat width − gaps between slats) ÷ 2
A divider 96 in wide and 8 ft high with 1.5 in slats spaced 2 in apart takes 28 slats, or 224 ft of slat lumber, plus 16 ft of rails at the top and bottom. It is about 56% open, and the slats fill the width exactly, leaving 0 in at the ends.
Gap and privacy
| Gap compared with the slat | Effect |
|---|---|
| Half the slat width | mostly private, a screen |
| Equal to the slat width | balanced, half open |
| Twice the slat width | airy, mostly a visual line |
Deeper slats (for example 1.5 × 2.5 in) block more of the view from an angle than thin ones at the same gap, so the divider looks more solid when you walk past it.
Building tips
- Use straight, dry lumber; poplar, pine, oak or ash are common choices. Check each slat for bow before buying.
- Sand and finish the slats before installing them; finishing between slats afterwards is slow.
- Screw a rail to the ceiling joists and another to the floor, then fix each slat to both with screws or hidden dowels.
- Cut a spacer block to the gap width so the slats stay evenly spaced.
- Check for pipes and cables in the floor and ceiling before drilling, and find the joists for a secure top fixing.
- For a freestanding divider, add a weighted base or fix it to a wall at one end so it cannot tip over.