Skip to content
Omnikalc

Speed hump profile, approach speed and spacing calculator

Enter the speed over the hump, the target speed, the acceleration and braking rates, and the height and length of the hump to get the vertical acceleration, the slope and the spacing.

Updated on
Your inputs
mph

Value out of range

mph

Value out of range

ft/s²

Value out of range

ft/s²

Value out of range

in

Value out of range

ft

Value out of range

Results

Vertical acceleration over the hump

0.21 g

Comfortable for a car at this speed
Maximum slope of the hump
8.3 %
Distance to accelerate
123 ft
Distance to brake
86 ft
Spacing between humps
209 ft

The speed hump calculator gives the vertical acceleration over the hump, the maximum slope, the distance to accelerate, the distance to brake and the spacing between humps, from the speed over the hump, the target speed, the acceleration and braking rates, and the height and length of the hump.

How the calculation works

  • Enter the speed over the hump, the target speed between humps and the acceleration and braking rates.
  • Enter the height and the length of the hump.
  • The calculator finds the vertical acceleration, the maximum slope, the distances to accelerate and brake, and the spacing between humps.

Example

A hump 3 in high and 12 ft long is crossed at 15 mph, that is 22 ft/s. The vertical acceleration is 8 × 0.25 × 22² / 12² / 32.174 = 0.21 g, and the steepest slope is 4 × 0.25 / 12 = 8.3 %. To go back to 25 mph (36.7 ft/s) at 3.5 ft/s², a car needs 123 ft, and it brakes from 25 to 15 mph in 86 ft at 5 ft/s². The humps are 209 ft apart.

Why it matters

The calculator helps traffic engineers, neighbourhood groups, property managers, contractors and students to compare hump profiles, to see how the height and the length change the comfort and the speed, and to estimate how far apart the humps must be to keep the speed low along the street.

Good to know

Check with the road authority, the fire service and the bus company before you build, because humps can slow emergency vehicles. Mark the hump with signs and paint, light it where the street is dark, and keep the drainage clear along the curb. Measure the real crossing speed after the build with a radar, and adjust the spacing if drivers speed up between the humps.

The stopping distance calculator gives the braking distance of a vehicle, the traffic signal cycle length calculator sizes the cycle of a signal, the acceleration calculator gives the rate from the speeds and the time, and the vertical curve calculator gives the profile of a road crest or sag.

Frequently asked questions

How is the vertical acceleration found?

The calculator models the hump as a parabola. The vertical acceleration of the wheel is eight times the height times the square of the speed, divided by the square of the length. A short and high hump or a higher speed gives a harsher bump. The value in g is a measure of comfort and of the speed that drivers will accept.

What is a good hump profile?

A common profile is a circular or parabolic hump of 3 to 4 in high and 12 to 14 ft long, which gives a crossing speed of 15 to 20 mph. Shorter humps, called speed bumps, are more abrupt and are used in parking lots at 5 to 10 mph. The local standard sets the height, the length and the signs.

How is the spacing found?

Between two humps, the driver accelerates from the crest speed to the target speed and brakes down to the crest speed again. The spacing is the sum of the two distances, each found from the change of the square of the speed divided by twice the rate. A closer spacing gives a lower mid-block speed.

What are the limits of the calculator?

The calculator uses a simple parabola and constant rates. It does not include the suspension of the vehicle, the buses and emergency vehicles, the drainage, the noise, the approach grade or the legal conditions. Check the local rules and the road authority before you build a hump, and mark it with signs and paint.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.