Skip to content
Omnikalc

How much does water damage restoration cost?

Enter the affected area, the water removal and drying price per square foot, the drying equipment days and daily rate, the repair price per square foot and your insurance deductible: get the drying cost, the total, what insurance pays and what you pay.

Updated on
Your inputs
sq ft

Value out of range

$

Value out of range

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

Results

Total cost

$3,250

You pay

$1,000

Stop the water, photograph everything and call your insurer quickly; drying must start within 24 to 48 hours to prevent mold, and policies usually cover sudden leaks but not flooding or slow, long-term leaks
Drying and equipment
$1,250
Insurance pays
$2,250

This calculator gives estimates for education and planning. It is not investment, tax or legal advice; for decisions about your own situation, talk to a qualified financial professional. A burst pipe, an overflowing appliance or a roof leak can soak floors, walls and ceilings in minutes. Fast drying is essential: mold can start growing within 24 to 48 hours. Restoration companies extract the water, run dehumidifiers and air movers for several days, then remove and replace damaged drywall, insulation and flooring. This calculator adds drying, equipment and repairs, then splits the bill between you and your insurer.

How the calculation works

  • Drying and equipment = area × drying price per square foot + equipment days × daily rate
  • Total cost = drying and equipment + area × repair price per square foot
  • Insurance pays = total − deductible, if positive
  • You pay = the deductible, or the total if it is smaller

Drying 200 sq ft at $4 per square foot costs $800, plus 3 days of equipment at $150, for $1,250. Repairs at $10 per square foot add $2,000, so the total is $3,250. With a $1,000 deductible, insurance pays $2,250 and you pay $1,000.

Typical prices

Item Typical price
Water extraction $1 to $4 per sq ft
Drying and dehumidification $2 to $5 per sq ft
Equipment rental per day $75 to $300
Drywall replacement $3 to $7 per sq ft
Flooring replacement $5 to $15 per sq ft
Contaminated water cleanup $7 to $10 per sq ft

Clean, gray or black water

  • Clean water from a supply line is the cheapest to handle.
  • Gray water from a washer or dishwasher needs disinfection.
  • Black water from sewage or floods requires removing porous materials and costs much more.

What insurance covers

Homeowners policies usually cover sudden, accidental water damage, such as a burst pipe or a failed water heater, but not gradual leaks, poor maintenance or floods from outside, which need separate flood insurance. Document everything with photos and keep damaged items until the adjuster sees them. Ask before signing a direct-billing agreement with a restoration company.

Act quickly

Shut off the water and electricity to affected areas, remove standing water and wet items, and start drying right away. The longer water sits, the more materials are lost and the higher the risk of mold.

Frequently asked questions

How much does water damage restoration cost?

About $3,250 in the default case, with $1,250 for drying and equipment; insurance pays $2,250 and you pay $1,000.

Does insurance cover water damage?

Sudden leaks such as a burst pipe usually are; floods and slow leaks usually are not.

How long does drying take?

Typically 3 to 5 days with fans and dehumidifiers.

Why act fast after a leak?

Mold can start within 24 to 48 hours, which raises the bill sharply.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.