Skip to content
Omnikalc

Work zone taper length calculator: taper lengths for a lane closure

Enter the speed and the lateral offset to close to get the merging, shifting and shoulder taper lengths, the spacing of the channelizing devices and their number in the merging taper.

Updated on
Your inputs
mph

Value out of range

ft

Value out of range

Results

Merging taper length L

540 ft

Shifting taper length (0.5 L)
270 ft
Shoulder taper length (0.33 L)
178 ft
Maximum spacing of the channelizing devices
45 ft
Number of devices in the merging taper
13

The work zone taper length calculator gives the length of the merging taper, the shifting taper and the shoulder taper, the maximum spacing of the devices and their number for a lane closure, with the MUTCD formulas, from the speed and the lateral offset.

How the calculation works

  • Enter the speed of the road and the lateral offset that the traffic must make, which is the width of the lane to close or of the shift.
  • The calculator applies the MUTCD formulas: L = W × S for speeds of 45 mph and more, and L = W × S² / 60 for lower speeds.
  • It gives the merging taper, the shifting taper, the shoulder taper, the maximum spacing of the cones or drums and the number of devices.

Example

A lane of 12 ft is closed on a road with a speed of 45 mph. The merging taper is L = 12 × 45 = 540 ft. A shifting taper is 0.5 × 540 = 270 ft and a shoulder taper is 0.33 × 540 = 178 ft. The devices in the taper are spaced at most 45 ft (the speed in mph, in feet), so the taper needs 540 / 45 + 1 = 13 devices.

Why it matters

The calculator helps traffic control planners, contractors, flaggers, road agencies and students to lay out the taper of a lane closure in a first plan, and to check the quantity of cones or drums needed for a work zone.

Good to know

Use the posted speed or the 85th percentile speed, whichever is higher, and add the advance warning signs and the buffer space of the traffic control plan. Increase the taper length where the sight distance is poor. Check the layout with the road authority before the work.

The stopping distance calculator gives the distance that a vehicle needs to stop, the stopping sight distance calculator checks the visibility, the horizontal curve calculator and the vertical curve calculator check the alignment where the taper is placed.

Frequently asked questions

What is a taper in a work zone?

A taper is a series of channelizing devices, such as cones, drums or barricades, that moves the traffic gradually from its normal path to the path around the work area. A merging taper closes a lane, and drivers have to merge into the open lane. A shifting taper moves the traffic sideways without closing a lane. A shoulder taper is used when the work is on the shoulder. A two-way traffic taper and a downstream taper are short tapers of about 100 ft.

How is the taper length calculated?

The MUTCD gives the length of a merging taper as L = W S for posted speeds of 45 mph or more, and L = W S² / 60 for speeds of 40 mph or less, where W is the width of the offset in feet and S the speed in mph. A shifting taper is at least 0.5 L, and a shoulder taper at least 0.33 L. For a road with a speed of 45 mph and a 12 ft lane, the merging taper is 540 ft.

How are the devices spaced?

In a taper, the maximum spacing of the devices in feet is equal to the speed limit in mph, with a maximum of 20 ft for urban roads with a low speed. The spacing in the buffer and the work area can be twice this value. The calculator gives the number of devices in the merging taper, including the first and the last one. Retroreflective devices and warning lights are used at night.

What are the limits of the calculator?

The calculator applies the basic formulas for a temporary traffic control zone. It does not include the advance warning signs, the buffer space, the longitudinal channelizing devices, the arrow boards, the flaggers, the lighting or the requirements of the state or the province, which can differ from the MUTCD. A traffic control plan must be made by a person who is qualified and approved by the road authority.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.