Skip to content
Omnikalc

Freezing time calculator: how long will your food take to freeze solid?

Choose a food, a shape and its size, then enter the freezer temperature and the surface coefficient to get the freezing time from Plank’s equation.

Updated on
Your inputs
in

Value out of range

°F

Value out of range

°F

Value out of range

BTU/h·ft²·°F

Value out of range

Results

Freezing time

2:55:11

Freezing time in hours
2.92 h
Share of the time set by surface convection
77.6 %
Share of the time set by conduction inside
22.4 %

Freezing a food takes longer than most people think. The freezing time calculator applies Plank’s equation to a slab, a cylinder or a sphere of a chosen food, from its size, its freezing point, the air temperature of the freezer and the surface coefficient. It shows the freezing time and how much of it comes from the surface and from conduction inside.

How the calculation works

  • Choose the food and its shape (slab, long cylinder or sphere), and enter its thickness or diameter, its initial freezing point, the freezer air temperature and the surface coefficient h.
  • The calculator takes the density, the latent heat of freezing and the thermal conductivity of the frozen food.
  • Plank’s equation gives the freezing time: t = ρ L / (Tf − Ta) × (P a / h + R a² / k), with P = 1/2, R = 1/8 for a slab, P = 1/4, R = 1/16 for a cylinder and P = 1/6, R = 1/24 for a sphere.
  • It shows how much of the time is set by surface convection and how much by conduction inside.

Example

A slab of lean beef 2 in thick, with a freezing point of 28 °F, is put in air at −10 °F with h = 6 BTU/h·ft²·°F. With a density of 1,050 kg/m³, a latent heat of 220 kJ/kg and a conductivity of 1.5 W/m·K, Plank’s equation gives a freezing time of 2.92 hours, of which 78 % is set by the surface convection and 22 % by conduction in the meat.

Why it matters

Freezing time matters for food safety (a slow freeze favors big ice crystals and quality loss), for the choice of a freezer or a blast chiller, for the design of a freezing line and for home use, such as how long to leave a roast or fish fillets before they are solid. The calculator gives a rough but useful order of magnitude.

Good to know

Plank’s equation is a simplified model: it assumes the food starts at its freezing point, has one sharp freezing temperature and uniform properties, and that the freezer temperature and the coefficient are constant. The latent heat and conductivity are typical values for frozen food, and they change with the water content. Packaging, air gaps between pieces and a stack of pieces slow the freezing, and this tool does not account for them.

The latent heat calculator covers the energy of phase change, the specific heat calculator covers the sensible heat, the thermal process F-value calculator covers the heat treatment of food, and the Fourier number calculator covers the time scale of conduction.

Frequently asked questions

What is Plank’s equation?

It is a simple formula for the time to freeze a food, published by Rudolf Plank in 1913. It assumes that the food is at its freezing point from the start and that a front of ice moves from the surface to the center. The time is the heat of freezing divided by the temperature driving force, times the sum of the resistance of the surface and of the frozen layer.

Why does the shape matter?

A slab is cooled from two sides, a long cylinder from all around, and a sphere from all around at the shortest path to the center. For the same thickness or diameter, a sphere freezes in about one third of the time of a slab, since P and R fall from 1/2 and 1/8 to 1/6 and 1/24.

How can I speed up freezing?

Raise the surface coefficient with a fan or a blast freezer (an air speed of 3 to 5 m/s gives h of 30 to 40 W/m²·K, against 5 to 10 in still air), lower the freezer temperature, or cut the food in thinner pieces. The time grows with the square of the thickness when conduction controls, so halving the thickness divides the time by about 4.

Is the equation accurate?

Plank’s equation is a first estimate that usually underestimates the real time by 10 to 30 %, because it neglects the cooling from the initial temperature to the freezing point, the sensible heat of the frozen part and the gradual freezing of food (it is not a pure substance with a sharp freezing point). Modified versions add these terms.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.