Skip to content
Omnikalc

Scaffold plank maximum span and load rating calculator

Enter the plank size, its strength, the load rating and the planned span to get the maximum span for bending and deflection, the stress and the deflection of a scaffold plank.

Updated on
Your inputs
in

Value out of range

in

Value out of range

psi

Value out of range

psi

Value out of range

Value out of range

ft

Value out of range

Results

Maximum span of the plank

8.66 ft

Maximum span for bending
8.66 ft
Maximum span for deflection
9.44 ft
Bending stress at the planned span
1,067 psi
Deflection at the planned span
0.975 in
Planned span to the maximum span
0.92
The planned span is within the maximum span of the plank

The scaffold plank span calculator gives the maximum span of a plank for bending and deflection under a light, medium or heavy duty load rating, and the stress and deflection at your planned span.

How the calculation works

  • Enter the width and thickness of the plank, its allowable bending stress and its modulus of elasticity.
  • Choose the load rating of the platform, the deflection limit and the planned span between the supports.
  • The calculator gives the maximum span for bending and for deflection, the stress and the deflection at the planned span, and the ratio.

Example

A plank of 2 × 10 (9.25 × 1.5 in) with an allowable stress of 1,250 psi and E = 1,400,000 psi is used on a 50 psf platform. The load on the plank is 50 × 9.25 / 144 = 3.21 lb/in. The maximum span for bending is 8.66 ft and for a deflection of L/60 is 9.44 ft, so the plank can span 8.66 ft. At 8 ft, the stress is 1,067 psi, the deflection is 0.975 in, and the ratio is 0.92.

Why it matters

The calculator helps scaffold builders, site supervisors, safety officers and students to choose the spacing of the supports for a platform, to compare plank sizes and to see why heavy duty platforms need closer supports.

Good to know

Use the real dimensions of the plank, such as 1.5 by 9.25 in for a 2 × 10, and the allowable stress of the grade that you have. For a platform with several planks, each plank carries the load on its own width. Check also that the planks extend over the supports by 6 to 12 in, without being too long, and that the planks are secured against movement. A concentrated load such as a worker at midspan or a pile of bricks may be more severe than the uniform load, so keep the span below the maximum if you are in doubt. Follow the code and the instructions of the scaffold maker.

The scaffolding calculator counts frames and planks for a scaffold, the scaffold tie calculator gives the wind force on the ties, the beam deflection calculator gives the deflection of a member and the fall protection clearance calculator gives the clearance below a worker.

Frequently asked questions

How is the span of a plank found?

The plank is a simple beam carrying a uniform load from the workers and materials on its width. The bending moment is w L² / 8, and the span is limited when the stress M / S reaches the allowable stress. The deflection is 5 w L⁴ / (384 E I), and the span is limited when it reaches the chosen fraction of the span.

What do the load ratings mean?

A scaffold platform is rated light duty for a load of 25 pounds per square foot, such as inspection or painting, medium duty for 50 pounds, such as bricklaying and plastering, and heavy duty for 75 pounds, such as the storage of heavy materials. The rating is the uniform load, and the plank must also carry the concentrated load of a worker.

Which allowable stress should I use?

Use the stress of the plank grade and species, from the grading rules, with the duration factor for the loading. Scaffold-grade lumber is graded for scaffold use, and its stress is often higher than that of common lumber. The calculator takes the value you enter, so use the manufacturer's data or the grading rules.

What does the calculator leave out?

The calculator leaves out the weight of the plank, the concentrated load of a worker at midspan, the overhang of the plank beyond the supports, the effect of knots and splits, the planks that are not in good condition, and the wet condition of the lumber. Inspect every plank before use, and follow the rules of your jurisdiction for the plank spans.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.