Swapping wheels is more than choosing a diameter. A different width and offset (ET) moves the wheel in the wheel well, closer to the suspension or to the fender. This calculator compares your current and new wheels, and shows how far the inner and outer edges move, the change in track width and the backspacing of each.
How the calculation works
- Distance to the inner edge = half the width + offset
- Distance to the outer edge = half the width − offset
- Change at an edge = new distance − current distance
- Track width change = 2 × (current offset − new offset)
- Backspacing ≈ (width + 1.5 in) ÷ 2 + offset ÷ 25.4
Example
A 7 in wheel with ET 40 is replaced by an 8 in wheel with ET 30. The inner edge sits 2.7 mm closer to the suspension, the outer edge 22.7 mm further out, and the track width grows by 20 mm. Backspacing goes from 5.83 in to 5.93 in. The outward move of 22.7 mm is a prompt to check the fender and the tire sidewall.
Why it matters
Fitment problems often appear only after the new wheels are mounted. A calculation first tells you whether a wheel is likely to rub, whether a spacer is needed and how the stance will change, which is much cheaper than returning wheels and tires.
Good to know
The calculation ignores the tire size, the exact lip of the wheel and suspension travel. A wider tire also moves the sidewall. Check the maximum width and offset recommended by the manufacturer, the brake clearance and the legal limits in your area, and test at full lock. Spacers or a different tire width can correct a small difference, but they change load on the wheel bearings, so use quality parts and re-torque the lug nuts after the first drive.
Related tools
The tire size calculator compares diameters and speedometer error, the speed from RPM calculator relates tire size to gearing, and the tire replacement cost calculator budgets a new set.