Skip to content
Omnikalc

Spectacle lens sag and edge thickness calculator

Enter the lens power, the front curve, the refractive index, the diameter and the minimum thickness to get the radii of both surfaces, the sags, the center thickness and the edge thickness of a minus or plus lens.

Updated on

Educational tool, not medical advice: this page does not diagnose and does not replace a doctor, nurse or pharmacist. It has not been reviewed by a healthcare professional. Editorial and medical policy

Your inputs
D

Value out of range

D

Value out of range

mm

Value out of range

mm

Value out of range

Results

Edge thickness

4.60 mm

A moderate edge thickness
Center thickness
1.50 mm
Back curve power
-6.00 D
Sag of the front surface at the edge
1.50 mm
Sag of the back surface at the edge
4.61 mm
Radius of the front surface
300.0 mm

The spectacle lens thickness calculator gives the sag of the two surfaces, the center thickness and the edge thickness of a lens from its power, its front curve, its refractive index and its diameter.

How the calculation works

  • Enter the power, the front curve and the index.
  • Enter the diameter of the cut lens and the minimum thickness.
  • Read the edge and center thickness.

Example

For a −4.00 D lens of index 1.60 with a +2.00 D front curve, the front radius is 0.6 / 2 = 300 mm and the back curve is −6.00 D, a radius of 100 mm. At a radius of 30 mm (a diameter of 60 mm), the front sag is 1.50 mm and the back sag is 4.61 mm. With a center thickness of 1.5 mm, the edge thickness is 1.5 + 4.61 − 1.50 = 4.60 mm.

Why it matters

The calculator helps opticians, optometry students and lens designers who explain to a patient why a stronger prescription gives a thicker edge, and compare materials before a purchase.

Good to know

The result is a geometric estimate for a round lens with spherical surfaces. Real lenses are often aspheric, which flattens the curves and reduces the thickness and the bulge, and the edge of a cut lens follows the shape of the frame, so the thickest edge is at the farthest corner of the frame and not at the average radius. The diameter that matters is the effective diameter of the frame plus twice the decentration of the optical center. A plus lens is thickest at the center and its minimum edge thickness is set for strength and mounting, and a minus lens is thinnest at the center with a minimum center thickness chosen for strength, usually near 1.5 mm for plastic. High-index materials are thinner but often have a lower Abbe number, which increases color fringes at the edge of vision, and they are denser than their thickness suggests, so the weight does not drop as much as the thickness. Always confirm with the lens supplier.

The minimum blank calculator treats the size of the blank, the spectacle magnification calculator shows the effect of thickness on the image size, the vertex distance calculator converts power and the Prentice calculator treats the induced prism.

Frequently asked questions

What is the sag of a lens surface?

The sag, or sagitta, is the height of the curved surface above a flat plane at a given distance from the center. It is s = r − √(r² − y²), where r is the radius of curvature and y the distance from the axis. The radius follows from the surface power: r = (n − 1) / F.

Why does a high index make thinner lenses?

For the same power the surfaces of a high-index lens are less curved, because the radius is (n − 1) divided by the power. Flatter surfaces have smaller sags, so a minus lens has a thinner edge and a plus lens a thinner center.

Does the front curve change the thickness?

Slightly. A steeper front curve on a minus lens usually makes the edge a little thinner but the lens more bulged, while the back curve is also changed to keep the power. The best form is chosen by the lens maker for the optics and the look.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.