Skip to content
Omnikalc

How large is a leaking heart valve?

Enter the PISA radius, the aliasing velocity, the peak regurgitant velocity and the jet VTI: get the effective regurgitant orifice area and the regurgitant volume.

Updated on

Educational tool, not medical advice: this page does not diagnose and does not replace a doctor, nurse or pharmacist. It has not been reviewed by a healthcare professional. Editorial and medical policy

Your inputs
mm

Value out of range

cm/s

Value out of range

m/s

Value out of range

cm

Value out of range

Results

Effective regurgitant orifice area (EROA)

0.32 cm²

EROA 0.20 to 0.39 cm²: in the moderate range
Regurgitant volume per beat
48 mL
Peak instantaneous flow rate
161 mL/s

When the mitral valve does not close properly, part of the blood leaks backwards into the left atrium at each heartbeat. Echocardiographers grade how severe this mitral regurgitation is, partly by estimating the size of the leak. The PISA method does this from colour Doppler: it measures the radius of the convergence zone of the flow just before the valve. This calculator turns the PISA radius, the aliasing velocity, the peak jet velocity and the jet VTI into the effective regurgitant orifice area (EROA) and the regurgitant volume.

How the calculation works

  • Flow rate at the PISA shell = 2π × r² × Va
  • EROA = 2π × r² × Va ÷ Vmax
  • Regurgitant volume = EROA × VTI of the regurgitant jet
  • Radius in cm, velocities in cm/s, VTI in cm; the EROA is in cm² and the volume in mL

Example

The PISA radius is 8 mm at an aliasing velocity of 40 cm/s, and the regurgitant jet has a peak velocity of 5 m/s and a VTI of 150 cm. The EROA is 2π × 0.8² × 40 ÷ 500 = 0.32 cm², in the moderate range. The regurgitant volume is 0.32 × 150 = 48 mL per beat. The peak flow rate at the shell is 161 mL/s.

Why it matters

The EROA and regurgitant volume help decide whether regurgitation is mild, moderate or severe, which guides follow-up and the timing of surgery or a valve repair. A large leak overloads the left ventricle over time and can lead to heart failure and atrial fibrillation.

Good to know

Measurements are sensitive: since the radius is squared, a 1 mm error on 8 mm changes the EROA by 25%. It is best to shift the baseline of the colour scale to get a clear hemisphere, and to measure at mid-systole. The grading thresholds used here are those for primary mitral regurgitation, and other valves and causes use other cut-offs. This tool is educational.

The mitral valve area calculator evaluates stenosis, the cardiac output calculator gives the forward flow, and the Qp:Qs ratio calculator measures shunts with another approach.

Frequently asked questions

What is the EROA?

The effective regurgitant orifice area is the size of the hole through which blood leaks backwards across a valve. It is one of the main measures used to grade the severity of regurgitation.

What is the PISA method?

The proximal isovelocity surface area method. Blood converging toward a leaking valve forms hemispherical shells of equal velocity. The flow through the shell of radius r is 2πr² × Va, where Va is the aliasing velocity, and the same flow passes through the orifice at velocity Vmax.

What cut-offs are used for mitral regurgitation?

For primary (degenerative) mitral regurgitation, guidelines consider an EROA of 0.40 cm² or more and a regurgitant volume of 60 mL or more as severe, and less than 0.20 cm² and 30 mL as mild. Values in between are moderate. Cut-offs differ for secondary regurgitation.

Is the PISA method always reliable?

No. It assumes a hemispherical shape and a circular orifice. It underestimates in eccentric jets and overestimates when the shell is flattened by the leaflet. A cardiologist integrates it with other signs.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.