Skip to content
Omnikalc

What is the area of the mitral valve?

Enter the Doppler pressure half-time, and optionally the cardiac output and mean gradient: get the mitral valve area by two methods and the stenosis grade.

Updated on

Educational tool, not medical advice: this page does not diagnose and does not replace a doctor, nurse or pharmacist. It has not been reviewed by a healthcare professional. Editorial and medical policy

Your inputs
ms

Value out of range

L/min

Value out of range

mmHg

Value out of range

Results

Mitral valve area (pressure half-time)

1.10 cm²

1.0 to 1.5 cm²: clinically significant stenosis (moderate in older grading, severe in current ACC/AHA staging)
Mitral valve area (Hakki formula)
1.07 cm²
Average of the two methods
1.08 cm²

The mitral valve separates the left atrium from the left ventricle. In mitral stenosis, usually caused by rheumatic fever, the valve narrows and blood has a hard time passing through. Its severity is graded by the valve area, which the cardiologist measures on Doppler echocardiography. This calculator turns the pressure half-time into a valve area and offers a second estimate from the Hakki formula for the cath lab.

How the calculation works

  • Pressure half-time method: MVA (cm²) = 220 ÷ pressure half-time (ms)
  • Hakki formula: MVA (cm²) = cardiac output (L/min) ÷ √(mean gradient in mmHg)
  • A normal mitral valve has an area of 4 to 6 cm²
  • Symptoms usually appear when the area falls below about 2 cm²

Example

The echocardiogram shows a pressure half-time of 200 ms. The valve area is 220 ÷ 200 = 1.10 cm². At catheterization, the cardiac output is 4 L/min and the mean gradient 14 mmHg, so the Hakki area is 4 ÷ √14 = 1.07 cm². The two methods agree closely, and the valve is clinically significantly narrowed.

Why it matters

The valve area, together with symptoms and the pressure in the lung vessels, guides the timing of treatment: medication, balloon valvotomy or valve replacement. A smaller area means a higher gradient, which raises the pressure in the left atrium and the lungs and can lead to shortness of breath and atrial fibrillation.

Good to know

The number 220 in the formula is empirical, and echocardiographers sometimes use 190 for prosthetic valves. The Hakki formula is simpler than the full Gorlin equation and works best when the heart rate is between 60 and 100 beats per minute. The grading thresholds changed in 2020, so always state which classification you use. This calculator is educational and is not a diagnosis.

The cardiac output calculator provides the flow value for the Hakki formula, and the BSA calculator lets you index valve areas to body size.

Frequently asked questions

What is the pressure half-time method?

On Doppler echocardiography, it is the time in milliseconds for the pressure gradient across the mitral valve to fall to half its peak value. The narrower the valve, the longer the pressure takes to equalise. The empirical formula MVA = 220 ÷ PHT gives the area.

What is the Hakki formula?

A simplified version of the Gorlin formula used during cardiac catheterization: valve area = cardiac output ÷ √(mean gradient). It is accurate at a normal heart rate and is only a rough check when the rate is high.

What is considered severe mitral stenosis?

Older classifications call a valve area under 1.0 cm² severe. Current ACC/AHA guidelines define severe stenosis as an area of 1.5 cm² or less, with a pressure half-time of 150 ms or more.

When is the pressure half-time method unreliable?

After balloon valvotomy, with significant aortic regurgitation, in atrial fibrillation with irregular rate and in the presence of left ventricular stiffness. The cardiologist chooses the method that fits each case.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.