Skip to content
Omnikalc

How fast can your channel carry data?

Enter the bandwidth and the signal-to-noise ratio: get the maximum data rate, the spectral efficiency, and the SNR and bandwidth needed for a target rate.

Updated on
Your inputs

Value out of range

dB

Value out of range

Value out of range

Results

Channel capacity

199.34 Mbit/s

The channel can carry your target rate in theory

SNR needed for your target rate

14.91 dB

Spectral efficiency
9.967 bit/s/Hz
Bandwidth needed at this SNR
10.03 MHz

The Shannon-Hartley theorem sets the maximum speed at which data can be sent over a noisy channel with as few errors as you like: C = B × log₂(1 + SNR). It applies to Wi-Fi, mobile networks, cables, satellite links and radio. Enter the bandwidth and the signal-to-noise ratio to get the capacity, or enter a target rate to see the signal-to-noise ratio and the bandwidth you need.

How the calculation works

  • SNR ratio = 10^(SNR in dB ÷ 10)
  • Spectral efficiency = log₂(1 + SNR ratio), in bit/s per Hz
  • Capacity C = bandwidth × spectral efficiency
  • SNR needed for a rate R = 10 × log₁₀(2^(R ÷ B) − 1)
  • Bandwidth needed = R ÷ spectral efficiency

Example

A Wi-Fi channel has a bandwidth of 20 MHz and a signal-to-noise ratio of 30 dB, which is 1,000 times. The spectral efficiency is 9.967 bit/s/Hz, so the capacity is 199.3 Mbit/s. To carry a target of 100 Mbit/s over the same bandwidth, you need only 14.91 dB of SNR. At 30 dB, 10.03 MHz would be enough.

Where it is used

Engineers use the capacity as a benchmark for modems, cellular standards, optical fibre and satellite links. It shows the trade-off between bandwidth, power and speed: a narrow band needs a high SNR to reach a given rate, while a wide band can work at a low SNR, which is the idea behind spread spectrum. It also explains why a weak signal slows your connection.

Good to know

This is a theoretical ceiling for a channel with white noise, and real systems lose speed to overhead, error correction, interference and non-ideal hardware. The SNR must be measured over the bandwidth in question. Capacity increases quickly at first as the SNR rises, then more slowly, so very high SNR brings small gains. At low SNR the capacity is nearly proportional to the power.

For path loss and link budgets, use the free-space path loss calculator, and for the data in flight on a link, the bandwidth-delay product calculator. The Nyquist sampling calculator covers the other basic limit of digital signals.

Frequently asked questions

What is the Shannon-Hartley theorem?

It gives the maximum data rate a noisy channel can carry with an arbitrarily low error rate: C = B × log₂(1 + S/N). No coding scheme can exceed this limit.

Why does the SNR use decibels?

Signal-to-noise ratios cover a huge range, so they are given in decibels. The theorem uses the plain ratio: 30 dB is 1,000 times, and 10 dB is 10 times.

Is doubling the bandwidth the same as doubling the power?

No. The capacity grows in proportion to bandwidth but only with the logarithm of the signal-to-noise ratio. Doubling the bandwidth doubles the capacity, while doubling the power adds only one bit per hertz at high SNR.

Can real systems reach the capacity?

Modern codes such as LDPC and turbo codes get within a fraction of a decibel of the limit. Real links lose a little to overhead, interference and imperfect hardware.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.