Skip to content
Omnikalc

Chézy formula open channel calculator

Enter the channel width, the depth, the slope and a roughness value to get the Chézy coefficient, the mean velocity, the discharge and the Froude number of a rectangular channel.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

%

Value out of range

Value out of range

Value out of range

ft^0.5/s

Value out of range

Results

Chézy coefficient C

126.9 ft^0.5/s

Mean velocity

5.50 ft/s

Discharge

164.89 ft³/s

Hydraulic radius
1.875 ft
Froude number
0.559
Flow regime (0 subcritical, 1 near critical, 2 supercritical)
0

The Chézy formula calculator gives the hydraulic radius, the Chézy coefficient, the mean velocity, the discharge, the Froude number and the flow regime of a rectangular open channel in uniform flow, with C taken from Manning, Bazin or a known value.

How the calculation works

  • Enter the bottom width, the flow depth and the slope in percent.
  • Choose how to get the Chézy coefficient: from Manning’s n, from Bazin’s γ, or enter C directly.
  • Enter the roughness value that goes with your choice.

Example

A channel of 10 ft by 3 ft has a hydraulic radius of 1.875 ft. On a slope of 0.1 %, the Chézy coefficient is 126.9 ft^0.5/s, the velocity 5.50 ft/s and the discharge 164.89 ft³/s. The Froude number is 0.559, so the flow regime is 0.

Why it matters

The calculator helps civil and environmental engineering students and practitioners who size drainage ditches, canals, culverts running partly full and flumes, or who need to cross-check a Manning calculation with the classic Chézy form used in river hydraulics.

Good to know

The formula applies to steady, uniform flow in a prismatic channel with a constant slope and roughness, and the slope is the bed slope in percent, not an angle. Typical Manning n values are 0.011 to 0.013 for smooth concrete, 0.025 to 0.035 for earth channels and 0.035 to 0.1 for natural streams with vegetation. The rectangular section is assumed. For other shapes, compute the area and the wetted perimeter and use the hydraulic radius. Use a safety margin for design and check the freeboard.

The Manning equation calculator uses the same physics with n directly, the Froude number calculator classifies the flow, the hydraulic diameter calculator gives the characteristic size of a section and the weir flow calculator covers flow over a crest.

Frequently asked questions

What is the Chézy formula?

The Chézy formula, from 1769, gives the mean velocity of uniform flow in an open channel as V = C √(R S), where R is the hydraulic radius (the flow area divided by the wetted perimeter), S the slope of the channel bed and C the Chézy coefficient. It balances the gravity driving the flow with the friction on the boundary.

How is the Chézy coefficient found?

C is not a constant. It depends on the roughness and the hydraulic radius. From Manning’s n, C = R^(1/6) / n in SI units, or 1.486 R^(1/6) / n in US units. Bazin’s formula gives C = 87 / (1 + γ / √R) in SI units, with γ a roughness coefficient from about 0.06 for smooth cement to 1.75 for rough earth channels.

What is the difference from Manning’s equation?

Substituting C = R^(1/6) / n into the Chézy formula gives Manning’s equation, V = R^(2/3) √S / n. The two are the same equation when C is taken from Manning’s n. Manning’s equation is more used in practice, and the Chézy formula is common in river hydraulics and in older texts and in some codes.

What does the Froude number tell?

The Froude number Fr = V / √(g y) compares the flow velocity with the speed of a small surface wave. Below 1 the flow is subcritical (tranquil), above 1 it is supercritical (rapid), and near 1 it is unstable. The calculator uses the flow depth as the characteristic length, which is exact for a rectangular channel.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.