Angles that look different can point in exactly the same direction, and trigonometry problems often ask you to replace one by a simpler one. This coterminal angles calculator takes an angle in degrees and a number of full turns to give the coterminal angle between 0° and 360°, the coterminal angle between −360° and 0°, the angle after the extra turns, the reference angle, the quadrant and the angle in radians.
How the calculation works
- Smallest positive coterminal angle = angle − 360° × ⌊angle ÷ 360°⌋. Subtracting whole turns keeps the direction the same and brings the angle into the range from 0° up to, but not including, 360°.
- Negative coterminal angle = the smallest positive angle − 360°. Any other coterminal angle is the angle + 360° × k for a whole number k, positive or negative.
- Reference angle = the acute angle that the terminal side makes with the x-axis: the angle itself in the first quadrant, 180° − angle in the second, angle − 180° in the third and 360° − angle in the fourth.
- Quadrant: 1 for angles from 0° to 90°, 2 up to 180°, 3 up to 270° and 4 up to 360°. An angle that lands exactly on 0°, 90°, 180° or 270° is on an axis.
Example
Take an angle of 400°. One full turn is 360°, so 400 − 360 = 40° is the coterminal angle between 0° and 360°, and 40 − 360 = −320° is the one between −360° and 0°. Adding 2 extra turns gives 400 + 720 = 1,120°. The angle of 40° is in the first quadrant, so the reference angle is 40° as well, and in radians it is 40 × π ÷ 180 = 0.6981 rad.
Why it matters
Students use coterminal and reference angles to evaluate sine, cosine and tangent of large or negative angles by reducing them to the first quadrant. The same reduction is used in navigation, in rotating machines and in animation, where an angle of 725° is simply an angle of 5°.
Good to know
The angle is treated as a rotation measured counterclockwise from the positive x-axis, with negative values going clockwise. Results are exact for whole degrees, and decimal degrees may show small rounding in the last digit. The quadrant output is zero when the angle sits on an axis, where the reference angle is 0° or 90° and one of the trigonometric values is zero or undefined.
Related tools
The unit circle calculator gives the sine and cosine of the standard angles and the trigonometry calculator solves right triangles from a reduced angle.