Skip to content
Omnikalc

Critical angle calculator: when is light trapped by total internal reflection?

Enter two refractive indices and a ray angle to get the critical angle, whether the ray is totally reflected, the refracted angle and the numerical aperture of a fiber.

Updated on
Your inputs

Value out of range

Value out of range

°

Value out of range

Results

Critical angle

80.57 °

Numerical aperture of the fiber √(n₁² − n₂²)
0.2425
Acceptance half-angle in air
14.03 °
Angle of the refracted ray in the second medium
90.00 °
Total internal reflection at this angle (1 = yes)
1
Total internal reflection: the ray stays in the denser medium

Light can be trapped in glass or water when it hits the surface at a steep enough angle. The critical angle calculator finds the critical angle from two refractive indices, tells if a ray at a given angle is totally reflected or refracted, and gives the refracted angle. For optical fibers it also gives the numerical aperture and the acceptance angle.

How the calculation works

  • Enter the refractive index of the denser medium (the core of a fiber, or water or glass), that of the other medium and the angle of a ray in the denser medium, measured from the normal.
  • The critical angle is θc = arcsin(n₂ / n₁). For rays steeper than θc, there is no refracted ray and the light is totally reflected.
  • The calculator tells if the ray at your angle is totally reflected or refracted, and finds the refracted angle with Snell’s law.
  • For a fiber, it also gives the numerical aperture √(n₁² − n₂²) and the acceptance half-angle in air.

Example

A fiber has a core of index 1.48 and a cladding of 1.46. The critical angle is 80.6° at the core–cladding boundary. A ray that hits the boundary at 85° from the normal is totally reflected. The numerical aperture is 0.2425, so light that enters the end within 14.0° of the axis is guided.

Why it matters

Total internal reflection is the principle of optical fibers, prisms in binoculars, the sparkle of diamonds, light pipes, refractometers and many sensors. The critical angle is the key number to design them and to explain why a fiber can carry light around a bend.

Good to know

The calculator is for a smooth, plane boundary between two transparent media with fixed refractive indices, and for rays in the meridian plane of a step-index fiber. The indices vary with wavelength and temperature. It does not include the evanescent wave beyond the boundary, the polarization of light, the loss by bending (the minimum bend radius of a fiber) and the modal dispersion.

The refraction calculator gives Snell’s law in general, the thin lens calculator covers image formation, the lensmaker calculator covers the focal length from the curvature and the index, and the telescope resolution calculator covers the diffraction limit.

Frequently asked questions

What is total internal reflection?

When light goes from a denser medium (higher refractive index) to a less dense one, it bends away from the normal. At the critical angle, the refracted ray runs along the interface, and beyond it there is no refracted ray: all the light is reflected back, with no loss. It happens in prisms, diamonds, optical fibers and the surface of water seen from below.

How does an optical fiber use it?

A fiber has a core of higher index surrounded by a cladding of lower index. Rays that hit the boundary at an angle larger than the critical angle are reflected again and again and travel along the fiber with very little loss. The range of angles at the input that give such rays is set by the numerical aperture.

What is the acceptance angle?

It is the largest angle to the fiber axis, in air, at which light can enter the end face and still be guided. It is given by sin θ = √(n₁² − n₂²). A larger difference of indices gives a larger acceptance angle but more modal dispersion, which limits the bandwidth over long distances.

Why is the critical angle of water–air about 49°?

Water has an index of 1.333, and air 1.000, so sin θc = 1 / 1.333 and θc = 48.6°. A diver looking up sees the whole sky inside a cone of 97° (twice the critical angle), and beyond it sees a mirror image of the bottom. For diamond (n = 2.42), the critical angle is only 24.4°, so light is trapped and sparkles.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.