A helix is the curve of a spring, a screw thread or a rope wound around a post. The helix length calculator gives the total length of the wire or rope, the length of one turn, the total height, the circumference and the helix angle from the diameter, the pitch and the number of turns.
How the calculation works
- Enter the diameter of the helix, measured through the center of the wire or the rope, not on the outside.
- Enter the pitch, the rise of the helix for one full turn, and the number of turns. You can enter a part of a turn, such as 5.5.
- The calculator unrolls one turn into a right triangle. The base is the circumference π × D and the height is the pitch, so the length of one turn is √((π D)² + pitch²).
- It gives the total length = turns × length of one turn, the total height = turns × pitch, the helix angle and the ratio of the length of one turn to the pitch.
Example
A rope is wound in a helix of 6 in diameter with a pitch of 4 in and 5 turns. The circumference is π × 6 = 18.85 in. One turn is a right triangle with sides 18.85 and 4, so its length is √(18.85² + 4²) = 19.27 in. The total length is 5 × 19.27 = 96.35 in, for a total height of 5 × 4 = 20 in. The helix angle is asin(4 / 19.27) = 11.98° from the horizontal.
Why it matters
The calculator helps makers, welders, riggers and students to cut the right length of wire, rope, tape or pipe for a spiral. It also shows how a small change in the pitch changes the length, and why a tight helix needs more material than the height suggests.
Good to know
Measure the diameter to the center of the material and use the same unit for the diameter and the pitch. The calculator ignores the thickness of the material that is wound and the extra length for the ends or the hooks, so add them. If the pitch is not constant, as in a stair stringer with a tapering diameter, split the helix into parts.
Related tools
The spiral staircase calculator sizes stairs that wind around a column, the circle calculator gives the circumference of a single turn, and the torsion spring and extension spring calculators size the wire of a coil spring.