Skip to content
Omnikalc

Spherical sector calculator: volume and surface area of a sphere wedge

Enter the radius of the sphere and the height of the cap to get the volume, the total surface area, the cap and cone areas and the radius of the base.

Updated on
Your inputs

Value out of range

Value out of range

Results

Volume of the spherical sector

1,047.20 in³

Total surface area
586.23 in²
Area of the curved cap
314.16 in²
Area of the conical surface
272.07 in²
Radius of the cap base
8.660 in

Imagine a cone with its tip at the center of a ball, and take the part of the ball inside the cone. This spherical sector calculator takes the radius of the sphere and the height of the cap to give the volume of the spherical sector, the total surface area, the curved cap area, the conical surface area and the radius of the cap base.

How the calculation works

  • Radius of the cap base a = √(h × (2r − h)), found from the right triangle that the radius, the base radius and the distance from the center to the base form.
  • Volume = 2 ÷ 3 × π × r² × h. A spherical sector is a cone and a spherical cap joined at the center of the sphere, and its volume depends only on r and h.
  • Curved cap area = 2 × π × r × h, and the conical surface = π × r × a.
  • Total surface area = π × r × (2h + a), the sum of the cap and the cone surfaces. The height is limited to 2r, the diameter of the sphere.

Example

A sphere of radius 10 in has a spherical sector with a cap 5 in high. The base of the cap has radius √(5 × (20 − 5)) = 8.66 in. The volume is 2 ÷ 3 × π × 100 × 5 = 1,047.2 in³. The curved cap has an area of 2π × 10 × 5 = 314.2 in², the conical surface has π × 10 × 8.66 = 272.1 in², so the total surface area is 586.2 in².

Why it matters

The shape appears in engineering and design, from domed tank ends and scoops to nozzles and the sectors of celestial spheres. The volume formula is among the simplest of the solids of revolution, since it needs only the radius and the height of the cap.

Good to know

The sphere is assumed to be perfect, and the cap height is measured along the axis from the base plane to the top of the dome. The calculator caps the height at the diameter of the sphere. Wall thickness and the interior of hollow parts are not modeled, and the total surface area includes both the cap and the conical surface but not a flat base, because a sector has none.

The spherical cap calculator gives the cap alone, and the volume calculator covers other solids such as cones, cylinders and complete spheres.

Frequently asked questions

What is a spherical sector?

A spherical sector is the solid cut from a sphere by a cone whose apex is at the center of the sphere. It is made of a spherical cap on the outside and a cone from the center to the edge of the cap. A hemisphere is the special case where the cap height equals the radius, and the cone is flat.

How is a spherical sector different from a spherical cap?

A spherical cap is only the dome cut off by a plane, and it does not include the cone to the center of the sphere. The sector adds that cone, so its volume is larger than the cap when the cap is less than a hemisphere. The calculator gives the sector, and the spherical cap calculator handles the cap alone.

What happens when the height is larger than the radius?

The cone then folds back, and the sector includes more than a hemisphere. The same formulas apply, and the base radius shrinks again until the height reaches the diameter of the sphere, where the sector is the whole sphere. The calculator limits the height to twice the radius.

What are the uses of the formula?

It is used for the volume of an ice cream scoop with a cone, for domed tanks and caps, for the lunar and planetary geometry of a cone of vision and for parts of lenses and bearings. In every case the formula gives the volume from two lengths.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.