Skip to content
Omnikalc

Spherical wedge calculator: volume, lune area and surface of a ball segment cut by an angle

Enter the radius of the sphere and the dihedral angle to get the volume of the spherical wedge, the area of the lune and the total surface area.

Updated on
Your inputs

Value out of range

°

Value out of range

Results

Volume of the spherical wedge

150.796

Area of the lune (curved surface)
75.398
Total surface area of the wedge
188.496
Share of the whole sphere
16.67 %

Slices of a ball show up in geometry, geography and design. The spherical wedge calculator takes the radius of the sphere and the dihedral angle, and gives the volume of the wedge, the area of the lune, the total surface area and the share of the whole sphere.

How the calculation works

  • Enter the radius r of the sphere and the dihedral angle θ, the angle between the two flat faces of the wedge, in degrees.
  • A spherical wedge, or ungula, is the part of a ball cut off by two half-planes that meet along a diameter. It looks like a slice of an orange.
  • Its volume is the fraction θ ÷ 360° of the whole ball: V = (θ ÷ 360) × (4/3)πr³.
  • The curved surface is a lune with area (θ ÷ 360) × 4πr². The total surface adds the two flat half-disks, which together have an area of πr².

Example

A sphere has a radius of 6 cm and the wedge has a dihedral angle of 60°, which is one sixth of a full turn. The volume is (1/6) × (4/3) × π × 216 = 150.80 cm³. The lune has an area of (1/6) × 4π × 36 = 75.40 cm², and the total surface is 75.40 + π × 36 = 188.50 cm².

Why it matters

Students of solid geometry and calculus meet spherical wedges in volume and surface area problems, and they appear in the study of the Earth, where the surface between two meridians is a lune.

Good to know

The angle must be between 0 and 360 degrees. The formulas assume a perfect sphere and flat cutting planes that pass through the center. For a cut that does not pass through the center, use a spherical cap or a spherical segment calculator instead.

The spherical cap calculator handles a slice by a single plane, and the spherical sector calculator covers a cone-shaped cut.

Frequently asked questions

What is a spherical wedge?

It is the solid part of a ball between two planes that pass through a diameter. Imagine cutting an orange into equal slices from pole to pole, and each slice is a spherical wedge. The angle between the planes is the dihedral angle.

What is a lune?

A lune is the curved surface of the wedge, a two-sided region on the sphere bounded by two half great circles. Its area is proportional to the dihedral angle, and a lune with a 180 degree angle is half of the sphere's surface.

How do I find the volume of a wedge?

Because volume is proportional to the angle, you multiply the volume of the whole ball by the fraction θ ÷ 360. For a radius r, the formula is (θ ÷ 360) × (4/3)πr³, or (2/3)r³θ with θ in radians.

What does the total surface area include?

The total surface is the lune plus the two flat faces. Each flat face is a half-disk of radius r, and together they have the area of one full disk, πr².

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.