Skip to content
Omnikalc

Air viscosity calculator: how thick is air at your temperature and pressure?

Enter the air temperature and pressure to get the dynamic viscosity, the density and the kinematic viscosity of dry air.

Updated on
Your inputs
°F

Value out of range

psi

Value out of range

Results

Kinematic viscosity (ft²/s)

0.0001621 ft²/s

Dynamic viscosity
0.00001813 Pa·s
Air density
1.2041 kg/m³
Kinematic viscosity (m²/s)
0.00001506 m²/s
Temperature in kelvin
293.15 K

Air feels like nothing, but its viscosity decides how it flows past wings, pipes and balls. The air viscosity calculator takes the air temperature and the absolute pressure, and gives the kinematic viscosity in ft²/s and m²/s, the dynamic viscosity, the air density and the temperature in kelvin.

How the calculation works

  • Enter the air temperature in degrees Fahrenheit and the absolute pressure in psi. Standard sea-level pressure is 14.696 psi.
  • The dynamic viscosity comes from Sutherland’s formula, μ = 1.458 × 10⁻⁶ × T^1.5 ÷ (T + 110.4) in Pa·s, with T in kelvin.
  • The density follows the ideal gas law for dry air, ρ = p ÷ (287.058 × T).
  • The kinematic viscosity is the dynamic viscosity divided by the density, ν = μ ÷ ρ. It is the value used in the Reynolds number.

Example

Dry air at 68 °F (293.15 K) and 14.696 psi (101,325 Pa) has a dynamic viscosity of 1.458 × 10⁻⁶ × 293.15^1.5 ÷ 403.55 = 1.813 × 10⁻⁵ Pa·s and a density of 1.204 kg/m³. The kinematic viscosity is 1.506 × 10⁻⁵ m²/s, or 1.621 × 10⁻⁴ ft²/s.

Why it matters

Engineers need the viscosity of air for Reynolds numbers, drag and heat transfer calculations in aerodynamics, ventilation and cooling. The value changes with temperature and altitude, so tables are not always enough. Pilots, fan and duct designers, wind tunnel engineers and drone builders all rely on it to turn the size and speed of an object into a Reynolds number and, from there, into drag, lift and heat transfer coefficients.

Good to know

The calculation treats air as dry and as an ideal gas, and Sutherland’s formula is an approximation. Humidity changes the density and the viscosity a little. For extreme pressures or temperatures, use reference data. At high altitude the pressure is lower, which lowers the density and so raises the kinematic viscosity, while the dynamic viscosity depends mainly on temperature.

The Reynolds number calculator uses the kinematic viscosity, and the air density calculator accounts for altitude and humidity.

Frequently asked questions

What is the viscosity of air?

Viscosity measures the resistance of a fluid to shear, or how much it resists flowing. Air is thin, with a dynamic viscosity of about 1.8 × 10⁻⁵ Pa·s at 20 °C. This is about 55 times lower than that of water.

What is Sutherland's formula?

It is a model that gives the dynamic viscosity of a gas as a function of absolute temperature, μ = μ₀ (T ÷ T₀)^1.5 × (T₀ + S) ÷ (T + S). For air, it is often written μ = 1.458 × 10⁻⁶ T^1.5 ÷ (T + 110.4). It is accurate to a few percent between about 100 and 1,900 K.

Why does the viscosity of air rise with temperature?

In gases, viscosity comes from the exchange of momentum by molecules moving between layers. Hotter molecules move faster and carry more momentum, so viscosity increases with temperature, which is the opposite of liquids. It hardly depends on pressure in ordinary conditions.

What is the kinematic viscosity used for?

The kinematic viscosity ν = μ ÷ ρ appears in the Reynolds number Re = v × L ÷ ν, which tells whether a flow is laminar or turbulent. Unlike the dynamic viscosity, it depends strongly on pressure, since the density does.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.