Skip to content
Omnikalc

Antoine equation calculator: vapor pressure from temperature

Pick a liquid and enter the temperature to get its vapor pressure in mmHg, kPa, atm and psi, and enter a pressure to get the boiling point from the Antoine equation.

Updated on
Your inputs
°F

Value out of range

Value out of range

Results

Vapor pressure at this temperature

43.7 mmHg

Within the range of the constants

Boiling point at the pressure entered

173.0 °F

Vapor pressure in kPa
5.83 kPa
Vapor pressure in atm
0.0575 atm
Vapor pressure in psi
0.845 psi

The vapor pressure of a liquid rises quickly with temperature, and the Antoine equation is the standard way to calculate it in chemistry and engineering. This Antoine equation calculator has constants for water, ethanol, methanol, acetone, benzene and toluene. Enter the temperature to get the vapor pressure in mmHg, kPa, atm and psi, and a pressure to get the boiling point.

How the calculation works

  • Antoine equation: log₁₀(P) = A − B ÷ (C + T), with P in mmHg and T in °C. A, B and C are constants measured for each compound over a range of temperatures.
  • Vapor pressure P = 10^(A − B ÷ (C + T)). The calculator converts your temperature from °F to °C first and gives the result in mmHg, kPa, atm and psi.
  • Boiling point at a pressure P: solve the equation for T, which gives T = B ÷ (A − log₁₀P) − C. At 1 atm (760 mmHg) this is the normal boiling point.
  • The result is reliable inside the temperature range of the constants, which is shown next to each compound.

Example

Ethanol at 68 °F (20 °C) has A = 8.20417, B = 1,642.89 and C = 230.30. The vapor pressure is 10^(8.20417 − 1,642.89 ÷ 250.30) = 10^1.6408 = 43.7 mmHg, or 5.83 kPa. At 1 atm the boiling point is 1,642.89 ÷ (8.20417 − 2.88081) − 230.30 = 78.3 °C, which is 173.0 °F.

Why it matters

Vapor pressure sets how fast a solvent evaporates, how a distillation works, whether a liquid is flammable at a given temperature and what vacuum is needed to boil a solvent off at a low temperature. Lab students use the Antoine equation in physical chemistry and chemical engineering courses.

Good to know

The constants are for pure compounds, and mixtures need Raoult’s law or an activity model. Values near the boiling point of water are accurate, but the constants for water here are for 1 to 100 °C and a different set is used above 100 °C. Check the constants against a reliable source for work that needs accuracy, since sets vary among references and units. The calculator is for education and estimates, and it is not a safety assessment of a flammable or toxic liquid.

The Clausius–Clapeyron calculator relates vapor pressure to the heat of vaporization, the Raoult’s law calculator gives the vapor pressure of a solution and the boiling point at altitude calculator shows the effect of lower air pressure.

Frequently asked questions

What is the Antoine equation?

It is an empirical formula that links the vapor pressure of a pure liquid to its temperature: log P = A − B ÷ (C + T). It was proposed by Louis Antoine in 1888 and is a simple improvement of the Clausius–Clapeyron relation, with a third constant that corrects for the change in the heat of vaporization.

What units do the constants use?

The constants used here give P in mmHg and T in °C, which is the most common form in tables. Other tables use bar or kPa and kelvin or log base e. Do not mix constants from different sources, because they are fitted together.

Why is there a temperature range?

The constants are fitted to measurements in a given range and may not be valid outside it. Within the range the error is a fraction of a percent. Outside, the formula can give errors that grow quickly, and the calculator marks the result as an extrapolation.

How can the equation give the boiling point?

A liquid boils when its vapor pressure equals the surrounding pressure. So you enter the pressure in the equation and solve for the temperature. At 760 mmHg this is the normal boiling point, and at a lower pressure, such as at altitude, the liquid boils at a lower temperature.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.