Skip to content
Omnikalc

Tafel equation calculator

Enter the overpotential, the exchange current density, the transfer coefficient, the number of electrons and the temperature to get the Tafel slope, the current density and the overpotential needed for a target current.

Updated on
Your inputs
mV

Value out of range

mA/cm²

Value out of range

Value out of range

Value out of range

°C

Value out of range

mA/cm²

Value out of range

Results

Tafel slope

118.3 mV/decade

Current density at this overpotential
0.0103 mA/cm²
Decades above the exchange current
1.01
Overpotential for the target current
355.0 mV
Slope for α = 0.5 and one electron
118.3 mV/decade

The Tafel equation calculator gives the Tafel slope, the current density at a given overpotential and the overpotential needed for a target current, from the exchange current density and the transfer coefficient.

How the calculation works

  • Enter the overpotential, the exchange current density and the transfer coefficient.
  • Enter the number of electrons, the temperature and a target current density.
  • The calculator gives the Tafel slope, the current density, the decades, the overpotential for the target and the reference slope.

Example

At 25 °C, with α = 0.5 and one electron, the slope is 2.303 × 8.314 × 298.15 / (0.5 × 96,485) = 118.3 mV per decade. With an exchange current density of 0.001 mA/cm² and an overpotential of 120 mV, the current density is 0.001 × 10^(120 / 118.3) = 0.0103 mA/cm². A current of 1 mA/cm², three decades higher, needs 355.0 mV.

Why it matters

The calculator helps electrochemistry students, researchers in batteries, fuel cells and electrolyzers, and corrosion engineers who analyze polarization curves.

Good to know

The Tafel law holds only at overpotentials above about 50 to 100 mV, where the reverse reaction is negligible. At lower values the full Butler-Volmer equation applies. In practice, measured curves include resistance of the solution and mass transport limits at high current, which bend the line, so fit the linear region only. The transfer coefficient is often 0.5 but varies with the mechanism, and the measured slope is used to identify the rate-limiting step. For anodic and cathodic branches, the slopes can differ. Remember that the current density here is per geometric area, unless you correct it for the real surface area.

The Butler-Volmer calculator gives the full current-potential relation, the Nernst calculator gives equilibrium potentials, the Faraday induction calculator covers induced voltage and the Arrhenius calculator treats temperature effects.

Frequently asked questions

What is the Tafel equation?

For a large overpotential η, the current density grows exponentially: i = i0 × 10^(η / b), where i0 is the exchange current density and b the Tafel slope. A plot of η against log i gives a straight line of slope b, which is how the parameters are measured.

How is the slope computed?

b = 2.303 R T / (α n F), where R is the gas constant, T the temperature, F the Faraday constant, n the number of electrons and α the transfer coefficient. At 25 °C with α = 0.5 and one electron, it is about 118 mV per decade.

What does the slope tell about a catalyst?

A smaller Tafel slope means the current rises faster with the overpotential, so the electrode is more efficient. Together with a high exchange current density, it is the key sign of a good electrocatalyst, for example for hydrogen or oxygen evolution.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.