Skip to content
Omnikalc

Bowen ratio energy balance calculator

Enter the net radiation, the soil heat flux, the temperature and vapor pressure differences between two heights and the hours of sun to get the Bowen ratio, the sensible and latent heat fluxes, the evaporative fraction and the evapotranspiration.

Updated on
Your inputs
W/m²

Value out of range

W/m²

Value out of range

K

Value out of range

kPa

Value out of range

h

Value out of range

Results

Bowen ratio β = γ ΔT / Δe

0.333

Latent heat flux LE

337.7 W/m²

Sensible heat flux H

112.3 W/m²

Available energy Rn − G
450.0 W/m²
Evaporative fraction LE / (Rn − G)
75.0 %
Evapotranspiration rate
0.496 mm/h
Evapotranspiration over the hours given
4.96 mm

The Bowen ratio energy balance calculator gives the Bowen ratio from the temperature and vapor pressure differences between two heights, then the sensible and latent heat fluxes, the evaporative fraction and the evapotranspiration from the net radiation and the soil heat flux.

How the calculation works

  • Enter the net radiation and the soil heat flux in W/m².
  • Enter the temperature and vapor pressure differences between the two heights.
  • Enter the hours of the flux and read the fluxes and the evapotranspiration.

Example

With a net radiation of 500 W/m² and a soil flux of 50 W/m², the available energy is 450.0 W/m². A temperature difference of 0.6 K and a vapor pressure difference of 0.12 kPa give a Bowen ratio of 0.333. The latent heat flux is 337.7 W/m² and the sensible heat flux 112.3 W/m², an evaporative fraction of 75.0 %. Evapotranspiration is 0.496 mm/h, or 4.96 mm over 10 h hours.

Why it matters

The calculator helps agronomists, irrigation planners, hydrologists, micrometeorologists and students who estimate crop water use from field measurements, check energy balance closure, or study how a surface partitions the incoming energy between heating and evaporation.

Good to know

The Bowen ratio method fails when β is close to −1, since the denominator 1 + β goes to zero, which happens at dawn, at dusk or with advection. The gradients must be measured with well-calibrated sensors, because small errors in ΔT or Δe change β a lot. The method assumes a uniform surface with sufficient fetch. The flux is assumed constant over the hours given, which overestimates a day with a varying sun, and nights are not included.

The latent heat calculator treats the heat of phase change, the sensible heat ratio calculator is the air-conditioning counterpart, the Monin-Obukhov length calculator treats stability and the reference evapotranspiration calculator estimates crop water demand.

Frequently asked questions

What is the Bowen ratio?

The Bowen ratio β is the ratio of the sensible heat flux H, which warms the air, to the latent heat flux LE, which evaporates water. It was introduced by Ira Bowen in 1926. A low value, near 0.1 over a well-watered crop or the ocean, means that most energy goes into evaporation, while a high value, 5 or more over a desert, means that the surface mostly warms the air.

How is it measured?

The Bowen ratio is computed from the gradients of air temperature and vapor pressure measured at two heights above the surface: β = γ × ΔT / Δe, where γ ≈ 0.0665 kPa per K is the psychrometric constant at sea level. With ΔT = 0.6 K and Δe = 0.12 kPa, β is about 0.33. The method assumes that heat and water vapor are carried by the same turbulence.

How does the energy balance give the fluxes?

The surface energy balance is Rn − G = H + LE, where Rn is the net radiation and G the soil heat flux. With H = β × LE, LE = (Rn − G) / (1 + β) and H = β × (Rn − G) / (1 + β). For Rn = 500, G = 50 and β = 0.33, LE is about 338 W/m² and H about 112 W/m².

How is the energy turned into evaporation?

The latent heat of vaporization is about 2.45 MJ per kg of water, so 1 W/m² evaporates 3600 / 2 450 000 = 0.00147 mm per hour. A flux of 338 W/m² evaporates about 0.5 mm per hour, or about 5 mm over 10 hours of sun. This is a way to estimate crop evapotranspiration without a lysimeter.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.